HII iSCSI Initiator Parameters
In the following menu, you can set the following options:
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
The iSCSI initiator Challenge-Handshake Authentication Protocol (CHAP) ID |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the Connect and the CHAP Mutual Authentication are enabled – This will be the reverse username used for the iSCSI initiator Challenge-Handshake Authentication Protocol. |
|
Value restrictions: |
Maximum string length is 128. |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
The iSCSI initiator Challenge-Handshake Authentication Protocol (CHAP) secret (password). |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the Connect and the CHAP Mutual Authentication are enabled – This will be the reverse password used for the iSCSI initiator Challenge-Handshake Authentication Protocol. |
|
Value restrictions: |
String length should be 0 or 12 to 16 |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
iSCSI initiator's IPv4 address |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, this will be set as the IP address of the initiator. |
|
Value restrictions: |
Should be in IPv4 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
The iSCSI initiator Primary DNS IP Address. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, this will be set as the DNS for the IP address of the initiator. |
|
Value restrictions: |
Should be in IPv4 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
The iSCSI initiator default Gateway IP address. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, this will be set as the default gateway IP address of the initiator. |
|
Value restrictions: |
Should be in IPv4 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
iSCSI initiator's default gateway IPv6 address |
|
Configurable: |
Yes |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and IPv4/IPv6 support is selected as IPv6, this will be set as the default gateway for the IPv6 address of the initiator. |
|
Value restrictions: |
Should be in IPv6 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
iSCSI initiator's IPv6 address |
|
Configurable: |
Yes |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and IPv4/IPv6 support is selected as IPv6, this will be set as the IP Address of the initiator. |
|
Value restrictions: |
Should be in IPv6 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
iSCSI initiator's DNS IPv6 address |
|
Configurable: |
Yes |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and IPv4/IPv6 support is selected as IPv6, this will be set as the DNS for the IPv6 address of the initiator. |
|
Value restrictions: |
Should be in IPv6 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
iSCSI initiator's prefix length of the IPv6 address |
|
Configurable: |
Yes |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
f the legacy boot protocol is iSCSI or iSCSI without fail-over and IPv4/IPv6 support is selected as IPv6, this will be set as the prefix length for the IPv6 address of the initiator. |
|
Value restrictions: |
Should be in integer between 0-128 |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
The initiator's iSCSI Qualified Name (IQN). |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, this will be set as the iSCSI Qualified Name of the initiator. |
|
Value restrictions: |
Maximum string length is 223 |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI Initiator Parameters |
|
Description: |
The iSCSI initiator Subnet Mask for an IPv4 initiator configuration. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, this will be set as the subnet mask for the IP address of the initiator. |
|
Value restrictions: |
Should be in IPv4 format |