NVIDIA Networking Server-Side Documentation of Flexboot v3.7.300 & UEFI v14.33.10

iSCSI General Parameters

In the following menu, you can set the following options:

worddavff16df3dd22d40450c284de7e42083a1-version-1-modificationdate-1550687495440-api-v2.png

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

When the DHCP IP is enabled, the initiator and target's IP, netmask, gateway and DNS will be taken from DHCP instead of from the menu.

Configurable:

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

When the DHCP IP and DHCP Parameters are enabled, all the initiator and target parameters are taken from DHCP instead of from the menu.

Configurable:

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Specifies whether IPv4 or IPv6 network addressing will be used for iSCSI initiator and targets

Configurable:

No

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Enables CHAP Authentication for iSCSI initiator.

Configurable

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Enables mutual CHAP authentication between the iSCSI initiator and target

Configurable:

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Controls booting to ISCSI target after connection.

Configurable:

Yes

Available options:

1 - Enable

2 - Disable

3 - One time disabled

© Copyright 2023, NVIDIA. Last updated on Feb 6, 2024.