Advanced Usage
Set Startup Denoising Strength
Use intensityRatio to set the denoising strength used when the BNR NIM pod starts:
For the operator custom resource, use the string form:
Allowed values are from 0.0 to 1.0, where 0.0 applies no suppression and 1.0 applies maximum suppression.
Update Denoising Strength at Runtime
The startup value is set with intensityRatio, but the running BNR NIM can also update the denoising strength dynamically through the NIM HTTP API. The service chart exposes this API on the <appName>-endpoint service’s nim-http port, which defaults to 8000.
For external access with service.type: NodePort, use the node address and the assigned or configured NodePort for the nim-http Service port. The default nim-http NodePort is 32516:
Set the runtime intensity to 0.5:
A successful response shows the applied intensity and a status message:
Read the current runtime intensity:
A successful response returns the current intensity:
Runtime updates are applied shortly after the set call succeeds and do not require redeploying the chart. They do not change the startup default used after pod restart; to change that default, update intensityRatio in Helm values or parameters.intensityRatio in the operator custom resource.
Use the 16 kHz Model
To use the 16 kHz model, set the following value:
For the operator custom resource:
Provide Custom Sender Media
The demo chart sender can mount a PVC containing a custom .ts input file:
Static ST 2110 Multicast
For fixed ST 2110 networks, set explicit input and output addresses:
Override Scheduler
The chart defaults are designed for Holoscan for Media clusters that use topology-aware scheduling. On clusters without topo-aware-scheduler, override the scheduler: