Configuration
VSR NIM ST 2110 deployments are configured through Helm values or through the NvidiaVsrNimMediaFunction custom resource.
VSR Processing Parameters
The Helm chart and operator both expose VSR processing parameters.
For Helm, configure these values in the following location:
For the operator, configure them in the following location:
The following are common VSR parameters:
Pipeline Configuration
The sample chart uses global.vsrPipeline as the single source of truth for sender, VSR NIM service, and receiver transport values.
Configure this section to specify the following:
- Input and output multicast groups.
- UDP video ports.
- Packet sizes.
- Input and output video formats.
- Sender and receiver behavior.
The default sample pipeline is as follows:
In the default sample pipeline, the ST 2110 input and output over the wire use UYVP / YCbCr 4:2:2 10-bit video. The sample receiver’s saved H.264 MPEG-TS artifact is encoded as H.264 High, yuv420p, 8-bit.
The sample sender generates a live SMPTE color bars test pattern by default and requires no input asset.
Replace the test multicast addresses with addresses allocated by your network team before production use.
Default global.vsrPipeline Structure
The sample Helm chart uses the following global.vsrPipeline structure to keep the sender, VSR NIM service, and receiver aligned:
Network, UDP, RTP, and PTP Settings
The sender/VSR-input hop and the VSR-output/receiver hop must agree on multicast groups, ports, and packet shape. For the sample chart, configure these values through global.vsrPipeline.
For the default 3840 × 2160 10-bit 4:2:2 output, the VSR output hop renders payload_size=1220, packets_per_line=8, and receiver payload-size=1200.
Video Format Settings
The format fields render the SDP a=fmtp:96 media attributes for each stream.
The chart renders SDP TCS=SDR for both hops. For YCbCr-4:2:2 10-bit, the GStreamer pipeline uses format=UYVP.
NMOS and Static ST 2110
In static ST 2110 mode, the Helm chart and operator self-activate local IS-05 senders and receivers from the configured transport values.
In NMOS mode, an empty registration URL uses DNS-SD discovery for the NMOS registry. If DNS-SD is not available, set the explicit IS-04 registration URL for the Helm chart or spec.parameters.nmosRegistrationUrl for the operator CR. Verify VSR NIM registration in the NMOS registry before relying on explicit registration URL mode.
Network Attachments
VSR NIM uses one receive attachment and one transmit attachment by default:
The in-pod local interface names must align with the generated ST 2110 configuration. The examples use net1 for receive and net2 for transmit.
For Helm service values, the equivalent network keys are as follows:
The rxName and txName keys describe how the VSR NIM pod uses each interface. The default media-a-rx-net and media-a-tx-net names are sample values. Replace them with the NetworkAttachmentDefinition resources available in your cluster. If the selected attachments support the traffic direction used by the pod, the underlying media networks do not need to be RX-only or TX-only.
If your SR-IOV device plugin exposes named Rivermax resources, set optional resource-pool annotations:
For clusters in which the VSR input and output attachments must come from the same NUMA-local SR-IOV pool, set both VSR network names to the same attachment and request two virtual functions from that pool:
Under Multus, each secondary network attachment appears inside the pod as an interface such as net1 or net2. The VSR NIM service uses input.video.localInterfaceName and output.video.localInterfaceName to bind Rivermax to the intended media interfaces. Keep the defaults unless your CNI assigns different in-pod interface names.
Runtime and Logging
The following are common runtime settings:
gpuId is the GPU ordinal visible inside the VSR container. It is not the physical GPU number on the host. With the default one-GPU pod, keep gpuId set to "0" and use Kubernetes node selection, scheduler policy, or NVIDIA device plug-in configuration to steer the pod to a physical GPU.