5.12. Peer Device Memory Access

This section describes the peer device memory access functions of the CUDA runtime application programming interface.

Functions

__host__cudaError_t cudaDeviceCanAccessPeer ( int* canAccessPeer, int  device, int  peerDevice )
Queries if a device may directly access a peer device's memory.
__host__cudaError_t cudaDeviceDisablePeerAccess ( int  peerDevice )
Disables direct access to memory allocations on a peer device.
__host__cudaError_t cudaDeviceEnablePeerAccess ( int  peerDevice, unsigned int  flags )
Enables direct access to memory allocations on a peer device.

Functions

__host__cudaError_t cudaDeviceCanAccessPeer ( int* canAccessPeer, int  device, int  peerDevice )
Queries if a device may directly access a peer device's memory.
Parameters
canAccessPeer
- Returned access capability
device
- Device from which allocations on peerDevice are to be directly accessed.
peerDevice
- Device on which the allocations to be directly accessed by device reside.
Description

Returns in *canAccessPeer a value of 1 if device device is capable of directly accessing memory from peerDevice and 0 otherwise. If direct access of peerDevice from device is possible, then access may be enabled by calling cudaDeviceEnablePeerAccess().

Note:

See also:

cudaDeviceEnablePeerAccess, cudaDeviceDisablePeerAccess, cuDeviceCanAccessPeer

__host__cudaError_t cudaDeviceDisablePeerAccess ( int  peerDevice )
Disables direct access to memory allocations on a peer device.
Parameters
peerDevice
- Peer device to disable direct access to
Description

Returns cudaErrorPeerAccessNotEnabled if direct access to memory on peerDevice has not yet been enabled from the current device.

Note:

See also:

cudaDeviceCanAccessPeer, cudaDeviceEnablePeerAccess, cuCtxDisablePeerAccess

__host__cudaError_t cudaDeviceEnablePeerAccess ( int  peerDevice, unsigned int  flags )
Enables direct access to memory allocations on a peer device.
Parameters
peerDevice
- Peer device to enable direct access to from the current device
flags
- Reserved for future use and must be set to 0
Description

On success, all allocations from peerDevice will immediately be accessible by the current device. They will remain accessible until access is explicitly disabled using cudaDeviceDisablePeerAccess() or either device is reset using cudaDeviceReset().

Note that access granted by this call is unidirectional and that in order to access memory on the current device from peerDevice, a separate symmetric call to cudaDeviceEnablePeerAccess() is required.

Note that there are both device-wide and system-wide limitations per system configuration, as noted in the CUDA Programming Guide under the section "Peer-to-Peer Memory Access".

Returns cudaErrorInvalidDevice if cudaDeviceCanAccessPeer() indicates that the current device cannot directly access memory from peerDevice.

Returns cudaErrorPeerAccessAlreadyEnabled if direct access of peerDevice from the current device has already been enabled.

Returns cudaErrorInvalidValue if flags is not 0.

Note:

See also:

cudaDeviceCanAccessPeer, cudaDeviceDisablePeerAccess, cuCtxEnablePeerAccess