6.25. Occupancy

This section describes the occupancy calculation functions of the low-level CUDA driver application programming interface.

Functions

CUresult cuOccupancyAvailableDynamicSMemPerBlock ( size_t* dynamicSmemSize, CUfunction func, int  numBlocks, int  blockSize )
Returns dynamic shared memory available per block when launching numBlocks blocks on SM.
CUresult cuOccupancyMaxActiveBlocksPerMultiprocessor ( int* numBlocks, CUfunction func, int  blockSize, size_t dynamicSMemSize )
Returns occupancy of a function.
CUresult cuOccupancyMaxActiveBlocksPerMultiprocessorWithFlags ( int* numBlocks, CUfunction func, int  blockSize, size_t dynamicSMemSize, unsigned int  flags )
Returns occupancy of a function.
CUresult cuOccupancyMaxActiveClusters ( int* numClusters, CUfunction func, const CUlaunchConfig* config )
Given the kernel function (func) and launch configuration (config), return the maximum number of clusters that could co-exist on the target device in *numClusters.
CUresult cuOccupancyMaxPotentialBlockSize ( int* minGridSize, int* blockSize, CUfunction func, CUoccupancyB2DSize blockSizeToDynamicSMemSize, size_t dynamicSMemSize, int  blockSizeLimit )
Suggest a launch configuration with reasonable occupancy.
CUresult cuOccupancyMaxPotentialBlockSizeWithFlags ( int* minGridSize, int* blockSize, CUfunction func, CUoccupancyB2DSize blockSizeToDynamicSMemSize, size_t dynamicSMemSize, int  blockSizeLimit, unsigned int  flags )
Suggest a launch configuration with reasonable occupancy.
CUresult cuOccupancyMaxPotentialClusterSize ( int* clusterSize, CUfunction func, const CUlaunchConfig* config )
Given the kernel function (func) and launch configuration (config), return the maximum cluster size in *clusterSize.

Functions

CUresult cuOccupancyAvailableDynamicSMemPerBlock ( size_t* dynamicSmemSize, CUfunction func, int  numBlocks, int  blockSize )
Returns dynamic shared memory available per block when launching numBlocks blocks on SM.
Parameters
dynamicSmemSize
- Returned maximum dynamic shared memory
func
- Kernel function for which occupancy is calculated
numBlocks
- Number of blocks to fit on SM
blockSize
- Size of the blocks
Description

Returns in *dynamicSmemSize the maximum size of dynamic shared memory to allow numBlocks blocks per SM.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

CUresult cuOccupancyMaxActiveBlocksPerMultiprocessor ( int* numBlocks, CUfunction func, int  blockSize, size_t dynamicSMemSize )
Returns occupancy of a function.
Parameters
numBlocks
- Returned occupancy
func
- Kernel for which occupancy is calculated
blockSize
- Block size the kernel is intended to be launched with
dynamicSMemSize
- Per-block dynamic shared memory usage intended, in bytes
Description

Returns in *numBlocks the number of the maximum active blocks per streaming multiprocessor.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaOccupancyMaxActiveBlocksPerMultiprocessor

CUresult cuOccupancyMaxActiveBlocksPerMultiprocessorWithFlags ( int* numBlocks, CUfunction func, int  blockSize, size_t dynamicSMemSize, unsigned int  flags )
Returns occupancy of a function.
Parameters
numBlocks
- Returned occupancy
func
- Kernel for which occupancy is calculated
blockSize
- Block size the kernel is intended to be launched with
dynamicSMemSize
- Per-block dynamic shared memory usage intended, in bytes
flags
- Requested behavior for the occupancy calculator
Description

Returns in *numBlocks the number of the maximum active blocks per streaming multiprocessor.

The Flags parameter controls how special cases are handled. The valid flags are:

  • CU_OCCUPANCY_DISABLE_CACHING_OVERRIDE, which suppresses the default behavior on platform where global caching affects occupancy. On such platforms, if caching is enabled, but per-block SM resource usage would result in zero occupancy, the occupancy calculator will calculate the occupancy as if caching is disabled. Setting CU_OCCUPANCY_DISABLE_CACHING_OVERRIDE makes the occupancy calculator to return 0 in such cases. More information can be found about this feature in the "Unified L1/Texture Cache" section of the Maxwell tuning guide.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaOccupancyMaxActiveBlocksPerMultiprocessorWithFlags

CUresult cuOccupancyMaxActiveClusters ( int* numClusters, CUfunction func, const CUlaunchConfig* config )
Given the kernel function (func) and launch configuration (config), return the maximum number of clusters that could co-exist on the target device in *numClusters.
Parameters
numClusters
- Returned maximum number of clusters that could co-exist on the target device
func
- Kernel function for which maximum number of clusters are calculated
config
- Launch configuration for the given kernel function
Description

If the function has required cluster size already set (see cudaFuncGetAttributes / cuFuncGetAttribute), the cluster size from config must either be unspecified or match the required size. Without required sizes, the cluster size must be specified in config, else the function will return an error.

Note that various attributes of the kernel function may affect occupancy calculation. Runtime environment may affect how the hardware schedules the clusters, so the calculated occupancy is not guaranteed to be achievable.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaFuncGetAttributes, cuFuncGetAttribute

CUresult cuOccupancyMaxPotentialBlockSize ( int* minGridSize, int* blockSize, CUfunction func, CUoccupancyB2DSize blockSizeToDynamicSMemSize, size_t dynamicSMemSize, int  blockSizeLimit )
Suggest a launch configuration with reasonable occupancy.
Parameters
minGridSize
- Returned minimum grid size needed to achieve the maximum occupancy
blockSize
- Returned maximum block size that can achieve the maximum occupancy
func
- Kernel for which launch configuration is calculated
blockSizeToDynamicSMemSize
- A function that calculates how much per-block dynamic shared memory func uses based on the block size
dynamicSMemSize
- Dynamic shared memory usage intended, in bytes
blockSizeLimit
- The maximum block size func is designed to handle
Description

Returns in *blockSize a reasonable block size that can achieve the maximum occupancy (or, the maximum number of active warps with the fewest blocks per multiprocessor), and in *minGridSize the minimum grid size to achieve the maximum occupancy.

If blockSizeLimit is 0, the configurator will use the maximum block size permitted by the device / function instead.

If per-block dynamic shared memory allocation is not needed, the user should leave both blockSizeToDynamicSMemSize and dynamicSMemSize as 0.

If per-block dynamic shared memory allocation is needed, then if the dynamic shared memory size is constant regardless of block size, the size should be passed through dynamicSMemSize, and blockSizeToDynamicSMemSize should be NULL.

Otherwise, if the per-block dynamic shared memory size varies with different block sizes, the user needs to provide a unary function through blockSizeToDynamicSMemSize that computes the dynamic shared memory needed by func for any given block size. dynamicSMemSize is ignored. An example signature is:

‎    // Take block size, returns dynamic shared memory needed
          size_t blockToSmem(int blockSize);

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaOccupancyMaxPotentialBlockSize

CUresult cuOccupancyMaxPotentialBlockSizeWithFlags ( int* minGridSize, int* blockSize, CUfunction func, CUoccupancyB2DSize blockSizeToDynamicSMemSize, size_t dynamicSMemSize, int  blockSizeLimit, unsigned int  flags )
Suggest a launch configuration with reasonable occupancy.
Parameters
minGridSize
- Returned minimum grid size needed to achieve the maximum occupancy
blockSize
- Returned maximum block size that can achieve the maximum occupancy
func
- Kernel for which launch configuration is calculated
blockSizeToDynamicSMemSize
- A function that calculates how much per-block dynamic shared memory func uses based on the block size
dynamicSMemSize
- Dynamic shared memory usage intended, in bytes
blockSizeLimit
- The maximum block size func is designed to handle
flags
- Options
Description

An extended version of cuOccupancyMaxPotentialBlockSize. In addition to arguments passed to cuOccupancyMaxPotentialBlockSize, cuOccupancyMaxPotentialBlockSizeWithFlags also takes a Flags parameter.

The Flags parameter controls how special cases are handled. The valid flags are:

  • CU_OCCUPANCY_DISABLE_CACHING_OVERRIDE, which suppresses the default behavior on platform where global caching affects occupancy. On such platforms, the launch configurations that produces maximal occupancy might not support global caching. Setting CU_OCCUPANCY_DISABLE_CACHING_OVERRIDE guarantees that the the produced launch configuration is global caching compatible at a potential cost of occupancy. More information can be found about this feature in the "Unified L1/Texture Cache" section of the Maxwell tuning guide.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaOccupancyMaxPotentialBlockSizeWithFlags

CUresult cuOccupancyMaxPotentialClusterSize ( int* clusterSize, CUfunction func, const CUlaunchConfig* config )
Given the kernel function (func) and launch configuration (config), return the maximum cluster size in *clusterSize.
Parameters
clusterSize
- Returned maximum cluster size that can be launched for the given kernel function and launch configuration
func
- Kernel function for which maximum cluster size is calculated
config
- Launch configuration for the given kernel function
Description

The cluster dimensions in config are ignored. If func has a required cluster size set (see cudaFuncGetAttributes / cuFuncGetAttribute),*clusterSize will reflect the required cluster size.

By default this function will always return a value that's portable on future hardware. A higher value may be returned if the kernel function allows non-portable cluster sizes.

This function will respect the compile time launch bounds.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaFuncGetAttributes, cuFuncGetAttribute