Is this page helpful?

Release Notes#

This section provides detailed information for releases and upgrades available for the NVIDIA DGX™ Software Stack for Red Hat Enterprise Linux 10 and Rocky Linux 10.

Current Software Versions#

The following table provides information about the matching firmware versions for the NVIDIA DOCA™ Host package with the doca-ofed installation profile v3.2.0.

Matching Firmware Versions#
OS
DGX A100
ConnectX-6
DGX A100
ConnectX-7
DGX H100/H200
ConnectX-7

EL 10

20.43.8002

28.47.1026

28.47.1026

Firmware for the NVIDIA® BlueField® DPU in NIC mode:

BlueField-3 Firmware Versions#
OS
DGX H100/H200
BlueField-3
DGX B200
BlueField-3

EL 10

32.43.2402

32.43.2402

For installation instructions, refer to:

Note

For information about LTS software versions for related networking components, refer to the Networking Long-Term Support Releases page.

Latest Release#

Important

Installing or updating to the DGX Software also updates the installed Red Hat Enterprise Linux 10 distribution to the latest version.

  • To check the latest Red Hat Enterprise Linux 10 version, refer to Red Hat Knowledgebase article 3078.

  • To check the MLNX_OFED package OS support, visit Mellanox and click the latest NVIDIA MLNX_OFED software version. Use the side menu to navigate to Release Notes > General Support and view Supported Operating Systems.

Release EL10-25.11#

Release Date: November 25, 2025

Release Highlights#

  • Supports Red Hat Enterprise Linux 10.0 and Rocky 10.0.

  • Continued support for NVIDIA® DGX™ A100, A800, H100, H200, and B200 systems.

    Please note these version requirements:

    • DGX A100/A800: DGX A100 Update 11 with FW v25.5.4

    • DGX H100/H200 v1.3.2 with Vulcan 1.8.1

    • DGX B200 v1.3.2 with UM FW 1.2.1

  • No support for NVIDIA® DGX™ Station™.

  • Updates DGX software components to the latest version that supports Red Hat Enterprise Linux 10 and compatible DGX firmware.

  • Supports GPU driver 580.105.08 with CUDA Toolkit 13.0 Update 2

  • Continues support for the NVIDIA® BlueField®-3 DPU in NIC mode on DGX H100, DGX H200, and DGX B200.

  • Supports the NVIDIA DOCA™ Host package with the doca-ofed installation profile v3.2.0-125000

  • Adopts TuneD for system configurations.

  • Abstracts packages into generic and DGX-specific packages.

Qualified Software#

The following table shows the current version information of the software packages provided in the NVIDIA repositories for the NVIDIA BaseOS 8.0.

Component

Latest versions in the repositories

OS

Red Hat Enterprise Linux 10.0 and Rocky Linux 10.0

Kernel
For Red Hat Enterprise Linux: 6.12.0-55.40.1.el10_0.x86_64
For Rocky Linux: 6.12.0-55.12.1.el10_0.x86_64

GPU Driver

CUDA Toolkit

DOCA-OFED

NCCL

2.28.9

cuDNN

9.16.0

DCGM

4.4.1

GPU Direct Storage

1.15.1 for CUDA 13.0

NVIDIA System Management (NVSM)

25.09.04

Podman on RHEL

Natively available in RHEL 10.0

NVIDIA Container Runtime

  • nvidia-container-toolkit: 1.18.0

  • libnvidia-container-tools: 1.18.0

  • libnvidia-container1: 1.18.0

MIG Configuration Tool

0.12.3

GDRCopy

2.5.1

DLFW (Deep Learning Frameworks)

25.08

Supported DGX Systems#

The EL10-25.11 release supports the following DGX systems:

  • DGX B200 1,440 GB

  • DGX H200 1,128 GB

  • DGX H100 640 GB

  • DGX A100 640 GB

  • DGX A100 320 GB

  • DGX A800 640 GB

The EL10-25.11 release does not support the following DGX systems:

  • DGX GB200

  • DGX H800

  • DGX-2

  • DGX-1 32 GB

  • DGX Station A100 320 GB

  • DGX Station A100 160 GB

  • DGX Station A800 320 GB

  • DGX Station 32 GB