Holds VP9 encoder configuration parameters.
Definition at line 2567 of file nvmedia_common.h.
Data Fields | |
| uint32_t | features |
| Holds bit-wise OR`ed configuration feature flags. More... | |
| uint32_t | gopLength |
| Holds the number of pictures in one GOP. More... | |
| NvMediaEncodeRCParams | rcParams |
| Holds the rate control parameters for the current encoding session. More... | |
| uint32_t | idrPeriod |
| Holds the IDR interval. More... | |
| uint32_t | filter_type |
| Set the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_LOOP_FILTER_PARAMS to change the following parameters. More... | |
| uint32_t | filter_level |
| Specifies the loop filter strength for each segment. More... | |
| uint32_t | sharpness_level |
| Specifies Sharpness level. More... | |
| int8_t | ref_lf_deltas [4] |
| Specifies the Loop filter strength adjustments based on frame type (intra, inter) More... | |
| int8_t | mode_lf_deltas [2] |
| Specifies the Loop filter strength adjustments based on mode (zero, new mv) More... | |
| NvMediaBool | bmode_ref_lf_delta_enabled |
| Set it to true if MB-level loop filter adjustment is on. More... | |
| NvMediaBool | bmode_ref_lf_delta_update |
| Set it to true if MB-level loop filter adjustment delta values are updated. More... | |
| uint32_t | base_qindex |
| Specifies quant base index (used only when rc_mode = 0) for each segment 0...255. More... | |
| int32_t | delta_y_dc_q |
| Specifies explicit qindex adjustment for y dccoefficient, -15...15. More... | |
| int32_t | delta_uv_dc |
| Specifies qindex adjustment for uv accoefficient, -15...15. More... | |
| int32_t | delta_uv_ac |
| Specifies qindex adjustment for uv dccoefficient, -15...15. More... | |
| uint32_t | transform_mode |
| Specifies transform_mode: 0: only4x4, 1: allow_8x8, 2: allow_16x16, 3: allow_32x32, 4:transform_mode_select. More... | |
| uint32_t | high_prec_mv |
| Specifies to enable high precision MV. More... | |
| NvMediaBool | error_resilient |
| Enable Error resiliency. More... | |
| NvMediaEncodeQP | initQP |
| Holds Initial QP parameters. More... | |
| NvMediaEncodeQP | maxQP |
| Holds maximum QP parameters. More... | |
| uint32_t NvMediaEncodeConfigVP9::base_qindex |
Specifies quant base index (used only when rc_mode = 0) for each segment 0...255.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_QUANTIZATION_PARAMS.
Definition at line 2604 of file nvmedia_common.h.
| NvMediaBool NvMediaEncodeConfigVP9::bmode_ref_lf_delta_enabled |
Set it to true if MB-level loop filter adjustment is on.
Definition at line 2596 of file nvmedia_common.h.
| NvMediaBool NvMediaEncodeConfigVP9::bmode_ref_lf_delta_update |
Set it to true if MB-level loop filter adjustment delta values are updated.
Definition at line 2598 of file nvmedia_common.h.
| int32_t NvMediaEncodeConfigVP9::delta_uv_ac |
Specifies qindex adjustment for uv dccoefficient, -15...15.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_QUANTIZATION_PARAMS.
Definition at line 2613 of file nvmedia_common.h.
| int32_t NvMediaEncodeConfigVP9::delta_uv_dc |
Specifies qindex adjustment for uv accoefficient, -15...15.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_QUANTIZATION_PARAMS.
Definition at line 2610 of file nvmedia_common.h.
| int32_t NvMediaEncodeConfigVP9::delta_y_dc_q |
Specifies explicit qindex adjustment for y dccoefficient, -15...15.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_QUANTIZATION_PARAMS.
Definition at line 2607 of file nvmedia_common.h.
| NvMediaBool NvMediaEncodeConfigVP9::error_resilient |
Enable Error resiliency.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_DISABLE_ERROR_RESILIENT.
Definition at line 2632 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::features |
Holds bit-wise OR`ed configuration feature flags.
TBD
Definition at line 2569 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::filter_level |
Specifies the loop filter strength for each segment.
Definition at line 2587 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::filter_type |
Set the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_LOOP_FILTER_PARAMS to change the following parameters.
Specifies the type of the filter used. :0 eight-tap smooth, 1: eight-tap, 2: eight-tap sharp, 3: bilinear, 4: switchable
Definition at line 2585 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::gopLength |
Holds the number of pictures in one GOP.
Low-latency application client can set goplength to NVMEDIA_ENCODE_INFINITE_GOPLENGTH so that keyframes are not inserted automatically.
Definition at line 2573 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::high_prec_mv |
Specifies to enable high precision MV.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_HIGH_PRECISION_MV.
Definition at line 2626 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::idrPeriod |
Holds the IDR interval.
If not set, this is made equal to gopLength in NvMediaEncodeConfigVP9. Low-latency application client can set IDR interval to NVMEDIA_ENCODE_INFINITE_GOPLENGTH so that IDR frames are not inserted automatically.
Definition at line 2579 of file nvmedia_common.h.
| NvMediaEncodeQP NvMediaEncodeConfigVP9::initQP |
Holds Initial QP parameters.
Client must set NVMEDIA_ENCODE_CONFIG_VP9_INIT_QP in features to use this. QP values should be within the range of 1 to 255
Definition at line 2636 of file nvmedia_common.h.
| NvMediaEncodeQP NvMediaEncodeConfigVP9::maxQP |
Holds maximum QP parameters.
Client must set NVMEDIA_ENCODE_CONFIG_VP9_QP_MAX in features to use this. The maximum QP values must be within the range of 1 to 255 and must be set to a value greater than NvMediaEncodeRCParams::minQP.
Definition at line 2641 of file nvmedia_common.h.
| int8_t NvMediaEncodeConfigVP9::mode_lf_deltas[2] |
Specifies the Loop filter strength adjustments based on mode (zero, new mv)
Definition at line 2594 of file nvmedia_common.h.
| NvMediaEncodeRCParams NvMediaEncodeConfigVP9::rcParams |
Holds the rate control parameters for the current encoding session.
Definition at line 2575 of file nvmedia_common.h.
| int8_t NvMediaEncodeConfigVP9::ref_lf_deltas[4] |
Specifies the Loop filter strength adjustments based on frame type (intra, inter)
Definition at line 2592 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::sharpness_level |
Specifies Sharpness level.
Definition at line 2589 of file nvmedia_common.h.
| uint32_t NvMediaEncodeConfigVP9::transform_mode |
Specifies transform_mode: 0: only4x4, 1: allow_8x8, 2: allow_16x16, 3: allow_32x32, 4:transform_mode_select.
This is for setting the feature flag NVMEDIA_ENCODE_CONFIG_VP9_ENABLE_TRANSFORM_MODE.
Definition at line 2620 of file nvmedia_common.h.
