This page is for Holoscan Sensor Bridge, version 2.7 (Latest) (default).
For other versions, use one of these documentation indexes:
- 2.7 (Latest) (default): https://docs.nvidia.com/holoscan/sensor-bridge/2-7-latest/llms.txt
- Archives: https://docs.nvidia.com/holoscan/sensor-bridge/archives/llms.txt
- The Holoscan Sensor Bridge IP supports single and block 32-bit read or write ECB
commands.
- The Holoscan Sensor Bridge IP does not support rapid back-to-back ICMP (or PING)
requests. The time between successive pings should be >= 1ms.
- The Sensor RX AXI-Stream TKEEP signals are unused. This implies all bytes of TDATA
are valid when TVALID is high.
- The Host TX & RX AXI-stream supports TKEEP not equal to all 1’s only when TLAST is
high. TKEEP must be all 1’s when TLAST is low.
