|
Physical |
Size: 3.79in. x 2.71in (96.30mm x 68.90mm) |
||||
|
Connector: Dual SFP28 Ethernet (copper and optical) |
|||||
|
Protocol Support |
Data Rate |
Ethernet |
1/10/25 Gb/s |
||
|
Ethernet: 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR |
|||||
|
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 8 lanes (2.0 and 1.1 compatible) |
|||||
|
Power and Airflow (a) |
Voltage: 12V |
||||
|
Power |
Cable |
PCIe Gen 3.0 |
PCIe Gen 4.0 |
||
|
Typical Power(b) |
Passive Cables |
10.73W |
11.53W |
||
|
Maximum Power |
Passive Cables |
12.14W |
12.94W |
||
|
Voltage
: 3.3Aux
Maximum current: 100mA |
|||||
|
Airflow Requirements @ 55C(c) |
Cable Type |
Hot Aisle - Heatsink to Port |
|||
|
Passive Cable |
300LFM |
||||
|
Active 0.8W Cable |
350LFM |
||||
|
Active 1.5W Cable(d) |
400LFM |
||||
|
Environmental |
Temperature |
Operational |
0°C to 55°C |
||
|
Non-operational |
-40°C to 70°C(e) |
||||
|
Humidity |
Operational |
10% to 85% relative humidity |
|||
|
Non-operational |
10% to 90% relative humidity |
||||
|
Altitude (Operational) |
3050m |
||||
|
Regulatory |
Safety |
CB / cTUVus / CE |
|||
|
EMC |
CE / FCC / VCCI / ICES / RCM |
||||
|
RoHS |
RoHS compliant |
||||
a. Power numbers are provided for passive cables only. For board power numbers while using active cables, please add the outcome of the following formula to the passive cables power numbers stated above: Active_Module_Power x Number_of_Modules x 1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. Airflow is measured in wind tunnel.
d. The LFM number is based on a thermotical 1.5W module. The actual LFM requirement may change depending on the active module thermal design.
e.
The non-operational storage temperature specifications apply to the product without its package.
|
Physical |
Size: 3.79in. x 2.71in (96.30mm x 68.90mm) |
|||
|
Connector: Single QSFP28 Ethernet (copper and optical) |
||||
|
Protocol Support |
Data Rate |
Ethernet |
1/10/25/50 Gb/s |
|
|
Ethernet: 50GBASE-R2, 50GBASE-R4, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR |
||||
|
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 8 lanes (2.0 and 1.1 compatible) |
||||
|
Power and Airflow(a) |
Voltage: 12V |
|||
|
Power |
Cable Type |
PCIe Gen 3.0 |
PCIe Gen 4.0 |
|
|
Typical Power(b) |
Passive Cables |
11.72W |
11.93W |
|
|
Maximum Power |
Passive Cables |
13.02W |
13.23W |
|
|
Voltage
: 3.3Aux
Maximum current: 100mA |
||||
|
Maximum power available through QSFP28 port: 2.5W (each port) |
||||
|
Airflow Requirements @ 55C |
Hot Aisle - Heatsink to Port |
|||
|
Passive Cable |
250LFM |
|||
|
Active 1.8W NVIDIA 50G Cable |
350LFM |
|||
|
Environmental |
Temperature |
Operational |
0°C to 55°C |
|
|
Non-operational |
-40°C to 70°C(c) |
|||
|
Humidity |
Operational |
10% to 85% relative humidity |
||
|
Non-operational |
10% to 90% relative humidity |
|||
|
Altitude (Operational) |
3050m |
|||
|
Regulatory |
Safety |
CB / cTUVus / CE |
||
|
EMC |
CE / FCC / VCCI / ICES / RCM |
|||
|
RoHS |
RoHS compliant |
|||
a. Power numbers are provided for passive cables only. For board power numbers while using active cables, please add the outcome of the following formula to the passive cables power numbers stated above: Active_Module_Power x Number_of_Modules x 1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c.
The non-operational storage temperature specifications apply to the product without its package.
3D model of the cards are available through the customer portal following login.
All dimensions are in millimeters. The mechanical tolerances are as follows:
Width: +/- 0.13mm
Height: +0/-0.13mm
|
Dual-Port SFP28 x8 Adapter Cards Mechanical Drawing |
Single-Port QSFP28 x8 Adapter Cards Mechanical Drawing |
|
|
All dimensions are in millimeters. The mechanical tolerances is +/- 0.2mm.
Single-Port QSF28 Adapter Card
|
Short Bracket |
Tall Bracket |
|
|
Dual-Port SFP28 Adapter Card
|
Short Bracket |
Tall Bracket |
|
|