This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions Release Notes in https://docs.mellanox.com/category/adapterfw.
Internal Ref. | Issue |
3628848 | Description: Updated the number of channels (ports) that are displayed in the iLO from 1 to 2 (num_channels_per_pkg=2) for dual port adapter cards. |
Keywords: Number of channels (ports) | |
Discovered in Version: 26.38.1002 | |
Fixed in Release: 26.39.1002 | |
3602169 | Description: Added a locking mechanism to protect the firmware from a race condition between insertion and deletion of the same rule in parallel. Such behavior occasionally resulted in firmware accessing a memory that has already been released, thus causing IOMMU / translation error. Note: This fix will not impact insertion rate for tables owned by SW steering. |
Keywords: Firmware steering | |
Discovered in Version: 26.38.1002 | |
Fixed in Release: 26.39.1002 | |
3571251 | Description: Fixed an issue that resulted in migration data corruption when running parallel save_vhca_state/load_vhca_state commands on the same PF. |
Keywords: VF live migration | |
Discovered in Version: 26.38.1002 | |
Fixed in Release: 26.39.1002 |
Internal Ref. | Issue |
3365411 | Description: Fixed a link failure that occurred due to a wrong ‘is_inphi_cable’ indication. |
Keywords: Link failure | |
Discovered in Version: 26.37.1014 | |
Fixed in Release: 26.38.1002 | |
3331179 | Description: Improved token calculation. |
Keywords: Token calculation | |
Discovered in Version: 26.37.1014 | |
Fixed in Release: 26.38.1002 | |
3491841 | Description: Fixed a firmware assert that occurred when tried to verify if the module supported “swap”. |
Keywords: Firmware assert | |
Discovered in Version: 26.37.1014 | |
Fixed in Release: 26.38.1002 |
Internal Ref. | Issue |
3434928 | Description: Modified the RDE behavior to return an error if the chassis ID subtype is AgentId, or Port ID subtype is ChassisComp. |
Keywords: RDE | |
Discovered in Version: 26.36.1010 | |
Fixed in Release: 26.37.1014 | |
3438177 | Description: Enabled VF LAG hash mode. The LAG_RESOURCE_ALLOCATION mlxconfig field is now modifiable. |
Keywords: VF LAG | |
Discovered in Version: 26.36.1010 | |
Fixed in Release: 26.37.1014 | |
2797986 | Description: Fixed an issue that prevented the adapter card from handling WoL packets when the host powered up directly into the standby mode. |
Keywords: WoL packets | |
Discovered in Version: 26.36.1010 | |
Fixed in Release: 26.37.1014 | |
3327847 | Description: CNP received, handled, and ignored counters in the hardware counters cannot work after moving to Programmable Congestion Control mode. |
Keywords: CNP, Programmable Congestion Control | |
Discovered in Version: 26.36.1010 | |
Fixed in Release: 26.37.1014 |
Internal Ref. | Issue |
3239340 | Description: Aligned RDE behavior to DSP0266 v1.15.0 table 23. |
Keywords: RDE | |
Discovered in Version: 26.35.1012 | |
Fixed in Release: 26.36.1010 |