Bug Fixes History
|
Internal Ref. |
Description |
|
1755286 |
Description: Fixed an issue where the Flexboot driver set SDR link speed for devices operating on Multi-Host mode or when the keep_link_up was enabled. |
|
Keywords: SDR, Multi-Host, Single-Host, port speed |
|
|
Discovered in Version: 3.5.305 |
|
|
Fixed in Version: 3.6.901 |
|
|
3044598 |
Description: Added support for PXE legacy interrupt for ConnectX-7 adapter cards. |
|
Keywords: Chain-loading, boot, ConnectX-7 |
|
|
Discovered in Version: 3.6.204 |
|
|
Fixed in Release: 3.6.804 |
|
|
1725147 |
Description: In devices that operate in Socket-Direct mode, the physical MAC of the auxiliary partitions is displayed as zeros instead of the actual MAC when the card is configured as InfiniBand. |
|
Keywords: Physical MAC, Boot menu, Socket-Direct |
|
|
Discovered in Version: 3.5.701 |
|
|
Fixed in Release: 3.6.204 |
|
|
843377/849223 |
Description: The physical MAC assigned via the boot menu is displayed as zeroes instead of the set MAC when ConnectX-4 VPI adapter card is configured as InfiniBand. |
|
Keywords: Physical MAC, Boot menu |
|
|
Discovered in Version: 3.5.901 |
|
|
Fixed in Release: 3.6.102 |
|
|
1725147 |
Description: In devices that operate in Socket-Direct mode, the physical MAC of the auxiliary partitions is displayed as zeros instead of the actual MAC when the card is configured as InfiniBand. |
|
Keywords: Physical MAC, Boot menu, Socket-Direct |
|
|
Discovered in Version: 3.5.701 |
|
|
Fixed in Release: 3.6.102 |
|
|
1447149 |
Description: FlexBoot menu Link Speed configuration will be "NA" in case speed is configured to 50GBase-KR4 |
|
Keywords: FlexBoot menu, Link Speed; 50GBase-KR4 |
|
|
Discovered in Version: 3.5.504 |
|
|
Fixed in Release: 3.5.803 |
|
|
1072419 |
Description: The FlexBoot DHCP loops indefinitely when it continuously gets NACK on the DHCP requests On some setups, it might also cause an RSOD after a a continues looping. |
|
Keywords: Bootloader grub2, WDS, RSOD |
|
|
Discovered in Release: 3.5.305 |
|
|
Fixed in Release: 3.5.504 |
|
|
1157875 |
Description: Pressing any of the arrow keys during boot might cause the boot process to be aborted. |
|
Keywords: Abort boot, arrows, FlexBoot |
|
|
Discovered in Release: 3.5.305 |
|
|
Fixed in Release: 3.5.403 |
|
|
1113560 |
Description: Fixed an issue that prevented the first iSCSI target parameters to be reset to their default values. |
|
Keywords: iSCSI target |
|
|
Discovered in Release: 3.5.110 |
|
|
Fixed in Release: 3.5.305 |
|
|
- |
Description: FlexBoot supports only 2K MTU. |
|
Keywords: Networking |
|
|
Discovered in Release: 3.4.903 |
|
|
Fixed in Release: 3.5.210 |
|
|
843209 |
Description: Fixed and issue which cause the link not to raise in the second port which is set as IB when the first port is ETH in PXE. |
|
Keywords: Link up, Ports |
|
|
Discovered in Release: 3.4.903 |
|
|
Fixed in Release: 3.5.109 |
|
|
847950 |
Description: Fixed wrong default value of Boot-To-Target in FlexBoot configuration. |
|
Keywords: Boot-To-Target, FlexBoot configuration |
|
|
Discovered in Release: 3.4.719 |
|
|
Fixed in Release: 3.4.903 |
|
|
691148 |
Description: When connecting a pre-configured port with VLAN to an IB fabric, the port runs as Ethernet port with the VLAN tag. |
|
Keywords: VLAN, Port Management |
|
|
Discovered in Release: 3.4.719 |
|
|
Fixed in Release: 3.4.903 |
|
|
792432 |
Description: Booting PXE using Grub2.X over HP G9/G8 servers results in system hang. |
|
Keywords: PXE boot, Grub2.X, HP G9/G8 |
|
|
Discovered in Release: 3.4.719 |
|
|
Fixed in Release: 3.4.903 |
|
|
690792 |
Description: If the PMM fails to allocate memory, the system hangs since FlexBoot cannot load from the expansion ROM. |
|
Keywords: PMM, expansion ROM |
|
|
Discovered in Release: 3.4.719 |
|
|
Fixed in Release: 3.4.812 |
|
|
697291 |
Description: In ConnectX-4, the PXE boot time measurement over TFTP Ethernet is 1:30 min for image size of 1GB, TFTP InfiniBand is 1:20 min, and iSCSI boot time measure- ment is 8 seconds for image size of 25 MB. |
|
Keywords: PXE Boot |
|
|
Discovered in Release: 3.4.719 |
|
|
Fixed in Release: 3.4.812 |
|
|
689068 |
Description: In hybrid BIOSes, if the BIOS loads legacy driver without closing the UEFI driver, the legacy driver fails to load. |
|
Keywords: BIOS, legacy mode |
|
|
Discovered in Release: 3.4.719 |
|
|
Fixed in Release: 3.4.812 |
|
|
634794 |
Description: Enabled 'boot_pci_busdevfn' initialization when booting from UNDI loader. |
|
Keywords: UNDI loader |
|
|
Discovered in Release: 3.4.650 |
|
|
Fixed in Release: 3.4.719 |
|
|
- |
Description: Removed the instruction that enabled write-protected section modifications after POST. |
|
Keywords: PXE Boot |
|
|
Discovered in Release: 3.4.650 |
|
|
Fixed in Release: 3.4.719 |