The driver works but the transmit and/or receive data rates are not optimal.
These recommendations may assist with gaining immediate improvement:
For best performance practices, please refer to the "Performance Tuning Guide for Mellanox Network Adapters".
Out of the box throughput performance in Ubuntu14.04 is not optimal and may achieve results below the line rate in 40GE link speed.
IRQ affinity is not set properly by the irq_balancer
For additional performance tuning, please refer to Performance Tuning Guide.
UDP receiver throughput may be lower than expected, when running over mlx4_en Ethernet driver.
This is caused by the adaptive interrupt moderation routine, which sets high values of interrupt coalescing, causing the driver to process large number of packets in the same interrupt, leading UDP to drop packets due to overflow in its buffers.
Disable adaptive interrupt moderation and set lower values for the interrupt coalescing manually.
Values above may need tuning, depend- ing the system, configuration and link speed.
On This Page