The firmware can be updated using one of the following methods.
Updating the Device Online
To update the device online on the machine from the NVIDIA site, use the following command line:
Updating the Device Manually
When running the
install script with the ‘
--without-fw-update’option or using an OEM card that you now wish to (manually) update firmware on your adapter card(s), perform the steps below. The following steps are also appropriate to burn newer firmware that was downloaded from the website (i.e., nvidia.com/en-us/networking/.com → Support → Firmware Download).
Get the device’s PSID.
- Download the firmware BIN file from the website or the OEM website.
Burn the firmware.
- Reboot the device once the firmware burning is completed.
Updating the Device Firmware Automatically Upon System Boot
Firmware can be automatically updated upon system boot.
The firmware update package (mlnx-fw-updater) is installed in the “/opt/mellanox/mlnx-fw-updater” folder, and the openibd service script can invoke the firmware update process if requested on boot.
If the firmware is updated, the following message will be printed to the system’s standard logging file:
Otherwise, the following message will be printed:
Please note that this feature is disabled by default. To enable the automatic firmware update upon system boot, set the following parameter to “yes” “RUN_FW_UPDATER_ONBOOT=yes” in the openibd service configuration file “/etc/infiniband/openib.conf”.
You can opt to exclude a list of devices from the automatic firmware update procedure. To do so, edit the configurations file “/opt/mellanox/mlnx-fw-updater/mlnx-fw-updater.conf” and provide a comma separated list of PCI devices to exclude from the firmware update.