NVIDIA NEO v2.7
NVIDIA MELLANOX NEO DOCUMENTATION

Appendix – Activating Switch Telemetry Using Telemetry Agent

To use NVIDIA ® Mellanox ® NEO ® as a controller for the telemetry agent, perform the following steps:

  1. Go to Settings → Telemetry, and configure the Data Collector. The Data Collector is the server to which the telemetry agents send their data.

    image2019-3-7_17-51-36.png

  2. Go to the NEO Devices table, and select the switch on which you want to activate the telemetry agent. You can check the devices in a Telemetry-supported group, to see if the switch has Docker capability.

    Warning

    The selected switch must have Docker capabilities. You might need to update the OS version for Docker support.

    image2019-3-7_17-51-53.png

  3. Right-click on the relevant device, and install the NEO telemetry agent.

    image2019-3-7_17-52-3.png

  4. Following a successful installation, the right-click menu for the device presents the new options set of "NEO Telemetry Agent”, where you can stop/run the telemetry container, uninstall the telemetry agent or upgrade the telemetry agent if available.

    image2019-3-7_17-52-13.png

    image2019-3-7_17-52-25.png

© Copyright 2023, NVIDIA. Last updated on Nov 14, 2023.