The XLIO library is a dynamically linked user-space library. The use of the XLIO library does not require any code changes or recompiling of user applications. Instead, it is dynamically loaded via the Linux OS environment variable, LD_PRELOAD. However, it is possible to load the XLIO library dynamically without using the LD_PRELOAD parameter, which requires minor application modifications.
When a user application transmits TCP and UDP, unicast and multicast IPv4/IPv6 data, or listens for such network traffic data, the XLIO library:
- Intercepts the socket Receive and Send calls made to the stream socket or datagram socket address families.
- Implements the underlying work in user space (instead of allowing the buffers to pass on to the usual OS network stack).
XLIO implements native RDMA verbs API. The native RDMA verbs have been extended into the Ethernet RDMA-capable NICs, enabling the packets to pass directly between the user application and the Ethernet NIC, bypassing the kernel and its TCP/UDP handling network stack.
You can implement the code in native RDMA verbs API, without making any changes to your applications. The XLIO library does all the heavy lifting under the hood, while transparently presenting the same standard socket API to the application, thus redirecting the data flow.
The XLIO library operates in a standard networking stack fashion to serve multiple network interfaces.
The XLIO library behaves according to the way the application calls the bind, connect, and setsockopt directives and the administrator sets the route lookup to determine the interface to be used for the socket traffic. The library knows whether data is passing to or from an Ethernet NIC. If the data is passing to/from a supported Ethernet NIC, the XLIO library intercepts the call and does the bypass work. If the data is passing to/from an unsupported Ethernet NIC, the XLIO library passes the call to the usual kernel libraries responsible for handling network traffic. Thus, the same application can listen in on multiple Ethernet NICs, without requiring any configuration changes for the hybrid environment.
XLIO Internal Thread
The XLIO library has an internal thread that is responsible for performing general operations in order to maintain a high level of performance. These operations are performed in the context of a separate thread to that of the main application.
The main activities performed by the internal thread are:
- Poll the CQ if the application does not do so to avoid packet drops
- Synchronize the card clock with the system clock
- Handle any application housekeeping TCP connections (which should not impact its data path performance). For example: sending acknowledgments, retransmissions etc...
- Handle the final closing of TCP sockets
- Update XLIO statistics tool data
- Update epoll file descriptor contexts for available non-offloaded data
- Handle bond management
There are several parameters by which the user can set the characteristics of the internal thread. See section XLIO Configuration Parameters for a detailed description.
The following Internet socket types are supported:
- Datagram sockets, also known as connectionless sockets, use User Datagram Protocol (UDP)
- Stream sockets, also known as connection-oriented sockets, use Transmission Control Protocol (TCP)