NVIDIA BlueField DPU BSP v3.9.8 LTS
NVIDIA BlueField DPU BSP v3.9.8 LTS

Updating DPU Software Packages Using Standard Linux Tools

As an alternative to BFB installation, it is possible to upgrade DPU software using standard Linux tools (i.e., APT in case of DEB-based distributions, YUM for RPM based distributions).

Public DOCA repositories are available under https://linux.mellanox.com/public/repo/doca/.

For Ubuntu 20.04 this DOCA repository is configured in the doca.list file:

Copy
Copied!
            

# cat /etc/apt/sources.list.d/doca.list # # Nvidia DOCA public repository configuration file. # For more information, refer to http://linux.mellanox.com # # To add a public key: # wget -qO - https://linux.mellanox.com/public/repo/doca/lts/latest/ubuntu20.04/aarch64/GPG-KEY-Mellanox.pub | sudo apt-key add - # deb [trusted=yes] https://linux.mellanox.com/public/repo/doca/lts/latest/ubuntu20.04/aarch64 ./

When a new NVIDIA software release is available, run the following commands to update your software packages to the new versions:

Copy
Copied!
            

$ wget -qO - https://linux.mellanox.com/public/repo/doca/lts/latest/ubuntu20.04/aarch64/GPG-KEY-Mellanox.pub | sudo apt-key add - $ apt update $ apt upgrade

After the software packages are updated, it is required to upgrade Boot Software (UEFI/ATF) and NIC firmware.

To upgrade UEFI/ATF (included in mlxbf-bootimages DEB package) on boot partition, run:

Copy
Copied!
            

$ bfrec --bootctl --policy dual $ bfrec --capsule /lib/firmware/mellanox/boot/capsule/boot_update2.cap --policy dual $ reboot

Note

To upgrade the DPU software to DOCA_1.5.1_BSP_3.9.3_Ubuntu_20.04-4.2211-LTS version from DOCA_1.5.0_BSP_3.9.3_Ubuntu_20.04-11:

  1. Run the following:

    Copy
    Copied!
                

    $ wget -qO - https://linux.mellanox.com/public/repo/doca/lts/latest/ubuntu20.04/aarch64/GPG-KEY-Mellanox.pub | sudo apt-key add - $ sudo apt update $ sudo apt-mark hold linux-tools-bluefield linux-image-bluefield linux-bluefield linux-headers-bluefield linux-libc-dev linux-tools-common $ sudo apt upgrade

  2. Download and install the mlxbf-bootimages DEB file which includes the DPU's UEFI/ATF and set the right image type ("dev" vs "prod"):

    Copy
    Copied!
                

    $ IMAGE_TYPE=dev $ wget -P /tmp -r --no-verbose --no-directories -l1 --no-parent -A 'mlxbf-bootimages_*_arm64.deb' https://linux.mellanox.com/public/repo/bluefield/latest/bootimages/${IMAGE_TYPE}/ $ dpkg -i /tmp/mlxbf-bootimages_*_arm64.deb

  3. Upgrade UEFI/ATF (included in mlxbf-bootimages DEB package) on the boot partition, run:

    Copy
    Copied!
                

    $ bfrec --bootctl --policy dual $ bfrec --capsule /lib/firmware/mellanox/boot/capsule/boot_update2.cap --policy dual $ reboot

  4. Update NIC firmware according to section "Firmware Upgrade".

© Copyright 2024, NVIDIA. Last updated on Jul 4, 2024.