NVIDIA BlueField DPU BSP v4.5.2 LTS
NVIDIA BlueField BSP v4.5.2

Installing Popular Linux Distributions on BlueField

Users wishing to build their own customized NVIDIA® BlueField® OS image can use the BFB build environment. See this GitHub webpage for more information.

Note

For any customized BlueField OS image to boot on the UEFI secure-boot-enabled DPU (default DPU secure boot setting), the OS must be either signed with an existing key in the UEFI DB (e.g., the Microsoft key), or UEFI secure boot must be disabled. See "Secure Boot" and its subpages for more details.

In general, running RedHat Enterprise Linux or CentOS on BlueField is similar to setting it up on any other ARM64 server.

A driver disk is required to support the eMMC hardware typically used to install the media onto. The driver disk also supports the tmfifo networking interface that allows creating a network interface over the USB or PCIe connection to an external host. For newer RedHat releases, or if the specific storage or networking drivers mentioned are not needed, you can skip the driver disk.

The way to manage boot flow components with BlueField is through grub boot manager. The installation should create a /boot/efi VFAT partition that holds the binaries visible to UEFI for bootup. The standard grub tools then manage the contents of that partition, and the UEFI EEPROM persistent variables, to control the boot.

It is also possible to use the BlueField runtime distribution tools to directly configure UEFI to load the kernel and initramfs from the UEFI VFAT boot partition if desired, but typically using grub is preferred. In particular, you would need to explicitly copy the kernel image to the VFAT partition whenever it is upgraded so that UEFI could access it; normally it is kept on an XFS partition.

Provisioning ConnectX Firmware

Prior to installing RedHat, you should ensure that the ConnectX SPI ROM firmware has been provisioned. If the BlueField is connected to an external host via PCIe, and is not running in Secure Boot mode, this is typically done by using MFT on the external host to provision the BlueField. If the BlueField is connected via USB or is configured in Secure Boot mode, you must provision the SPI ROM by booting a dedicated bootstream that allows the SPI ROM to be configured by the MFT running on the BlueField Arm cores.

There are multiple ways to access the RedHat installation media from a BlueField device for installation.

  1. You may use the primary ConnectX interfaces on the BlueField to reach the media over the network.

  2. You may configure a USB or PCIe connection to the BlueField as a network bridge to reach the media over the network.

    Note

    Requires installing and running the RShim drivers on the host side of the USB or PCIe connection.

  3. You may connect other network or storage devices to the BlueField via PCIe and use them to connect to or host the RedHat install media.

    Warning

    This method has not been tested.

In principle, it is possible to perform the installation according to the second method above without first provisioning the ConnectX SPI ROM, but since you need to do that provisioning anyway, it is recommended to perform it first. In particular, the PCIe network interface available via the external host’s RShim driver is likely too slow prior to provisioning to be usable for a distribution installation.

Managing Driver Disk

NVIDIA provides a number of pre-built driver disks, as well as a documented flow for building one for any particular RedHat version.

Normally a driver disk can be placed on removable media (like a CDROM or USB stick) and is auto-detected by the RedHat installer. However, since BlueField has no removable media slots, you must provide it over the network. Although, if you are installing over the network connection via the PCIe/USB link to an external host, you will not have a network connection either. As a result, the procedure documented is for modifying the default RedHat images/pxeboot/initrd.img file to include the driver disk itself.

To create the updated initrd.img, you should locate the image/pxeboot directory in the RedHat installation media. This will have a kernel image file (vmlinuz) and initrd.img (initial RAM disk). The bluefield_dd/update-initrd.sh script takes the path to the initrd.img as an argument and adds the appropriate BlueField driver disk ISO file to the initrd.img.

When booting the installation media, make sure to include inst.dd=/bluefield_dd.iso on the kernel command line, which will instruct Anaconda to use that driver disk, enabling the use of the IP over USB/PCIe link (tmfifo) and the DesignWare eMMC (dw_mmc).

Contact NVIDIA Enterprise Support for information on the installation of CentOS distributions.

The following table lists the BlueField drivers which are part of the Linux distribution.

Driver

Description

BlueField

BlueField-2

BlueField-3

bluefield-edac

BlueField-specific EDAC driver

gpio-mlxbf

GPIO driver

gpio-mlxbf2

GPIO driver

gpio-mlxbf3

GPIO driver

i2c-mlx

I2C bus driver (i2c-mlxbf.c upstream)

ipmb-dev-int

Driver needed to receive IPMB messages from a BMC and send a response back. This driver works with the I2C driver and a user-space program such as OpenIPMI.

ipmb-host

Driver needed on the DPU to send IPMB messages to the BMC on the IPMB bus. This driver works with the I2C driver. It only loads successfully if it executes a successful handshake with the BMC.

mlxbf-gige

Gigabit Ethernet driver

mlxbf-livefish

BlueField HCA firmware burning driver. This driver supports burning firmware for the embedded HCA in the BlueField SoC.

mlxbf-pka

BlueField PKA kernel module

mlxbf-pmc

Performance monitoring counters. The driver provides access to available performance modules through the sysfs interface. The performance modules in BlueField are present in several hardware blocks and each block has a certain set of supported events.

mlxbf-ptm

Kernel driver that provides a debufgs interface for the system software to monitor the BlueField device's power and thermal management parameters.

mlxbf-tmfifo

TMFIFO driver for BlueField SoC

mlx-bootctl

Boot control driver. This driver provides a sysfs interface for systems management software to manage reset time actions.

mlx-cpld

Device driver for CPLD

mlx-trio

TRIO driver for BlueField SoC

pwr-mlxbf

Supports reset or low-power mode handling for BlueField.

pinctrl-mlxbf

Allows multiplexing individual GPIOs to switch from the default hardware mode to software-controlled mode.

© Copyright 2024, NVIDIA. Last updated on Jul 10, 2024.