Bug Fixes History
This section includes history of bug fixes of 3 major releases back. For older releases history, please refer to the relevant firmware versions.
Internal Ref. | Issue |
1929850 | Description: Creating an NVMoF offloaded target while running the LFWP flow may cause the device to become unstable. |
Keywords: Live Firmware Patch, LFWP, NVME | |
Discovered in Version: 12.26.1040 | |
Fixed in Release: 12.26.4012 | |
1778343 | Description: Fixed an issue that caused IPoIB not to function when there were DC CNAK QPs active. |
Keywords: IPoIB | |
Discovered in Version: 12.25.1020 | |
Fixed in Release: 12.26.1040 | |
1803791 | Description: On rare occasions, when firmware coalesce Host stuck events occur, a async event might be delayed to be reported, and not be triggered until the next time the PCIe hangs on one of the hosts. |
Keywords: PCIe Error Notification | |
Discovered in Version: 12.25.1020 | |
Fixed in Release: 12.26.1040 | |
1824111 | Description: Renamed the GMP Mellanox Vendor Specific External Capability mask enum from IsDiagnosticCountersSupported to IsDiagnosticDataSupported. |
Keywords: GMP Mellanox Vendor Specific External Capability mask DiagnosticData | |
Discovered in Version: 12.25.1020 | |
Fixed in Release: 12.26.1040 | |
1822787 | Description: Fixed an issue that caused a function to misbehave when a PCIe TLP was set with a poisoned indication. |
Keywords: PCIe TLP | |
Discovered in Version: 12.25.1020 | |
Fixed in Release: 12.26.1040 | |
1771921 | Description: Fixed an issue that prevented users with non-port owner privilege from using the “read DCBX access registry key” EGID_DCBX_APP/REGID_DCBX_PARAM. |
Keywords: DCBX | |
Discovered in Version: 12.24.1000 | |
Fixed in Release: 12.25.1020 | |
1615586 | Description: Fixed a rare issue that caused the QP to falsely transition into the error state as a result of handling duplicate read/atomic request followed by memory key invalidation. |
Keywords: CQE | |
Discovered in Version: 12.24.1000 | |
Fixed in Release: 12.25.1020 | |
1678824 | Description: Fixed an issue that prevented the user to enable the port after disabling it in the VF NODNIC. |
Keywords: VF NODNIC | |
Discovered in Version: 12.24.1000 | |
Fixed in Release: 12.25.1020 | |
1606289 | Description: Enlarged the number of modify fields to 16 to avoid IPv6 header rewrite failure. |
Keywords: IPv6 header rewrite | |
Discovered in Version: 12.24.1000 | |
Fixed in Release: 12.25.1020 | |
1627973 | Description: Fixed an issue that prevented IB QP counters for Acks/Responses from working as a results the NACK/OOS counters shown as zero. |
Keywords: IB QP counters for Acks/Responses | |
Discovered in Version: 12.24.1000 | |
Fixed in Release: 12.25.1020 | |
1501744 | Description: Fixed a false signature error reported by the firmware during retransmissions. |
Keywords: False signature error | |
Discovered in Version: 12.18.1000 | |
Fixed in Release: 12.24.1000 | |
1547318 | Description: Fixed an issue that prevented the system from counting multicast/broadcast traffic on the ETH unicast vport counter when the driver did not specify the MAC address in the FTE match criteria of the Flow Table Entry in the eswitch’s FDB table. |
Keywords: Multicast/broadcast traffic | |
Discovered in Version: 12.23.1020 | |
Fixed in Release: 12.24.1000 | |
1284452/ 1282926 | Description: Fixed an issue that caused the mlxconfig tool to present all possible expansion ROM images, instead of presenting only the existing images. |
Keywords: mlxconfig | |
Discovered in Version: 12.22.1002 | |
Fixed in Release: 12.24.1000 | |
1424873 | Description: Modifying VMQoS rate limiter parameters during traffic might cause transmission failure. |
Keywords: VMQoS, rate limiter | |
Discovered in Version: 12.22.1002 | |
Fixed in Release: 12.24.1000 | |
1475993 | Description: Aligned the default tuning type in PHY TEST MODE to the device protocol. |
Keywords: PHY | |
Discovered in Version: 12.23.1020 | |
Fixed in Release: 12.24.1000 | |
1403211 | Description: When a device is operating in Safe Mode state, and the user issues the mlxfwreset command, the device might fail to come-up correctly after the reset. Note: Do not run mlxfwreset when operating in a Safe Mode state. |
Keywords: mlxfwreset | |
Discovered in Version: 12.23.1020 | |
Fixed in Release: 12.24.1000 | |
1431772 | Description: Fixed an issue that caused the max_qp_retry_freq_exceeded counter (including a CQE with error syndrome 0x97, and the QP moving to error state) to be activated only after exceeding the NIC Vport context max_qp_retry_limit, and not when reaching it. |
Keywords: max_qp_retry_freq_exceeded | |
Discovered in Version: 12.22.1002 | |
Fixed in Release: 12.24.1000 | |
1295606 | Description: Fixed an issue related to PCIe "Surprise link down" event reporting capability. |
Keywords: PCIe | |
Discovered in Version: 12.22.1002 | |
Fixed in Release: 12.24.1000 | |
1434863 | Description: Fixed an issue that resulted in the link partner experiencing false active linkup when plugging in a base-T cable to a closed port. |
Keywords: Interfaces | |
Discovered in Version: 12.22.1002 | |
Fixed in Release: 12.24.1000 | |
1424873 | Description: Modifying VMQoS rate limiter parameters during traffic might cause transmission failure. |
Keywords: VMQoS, rate limiter | |
Discovered in Version: 12.22.1002 | |
Fixed in Release: 12.24.1000 |