Specifications
Physical | Adapter Card Size: 2.71 in. x 5.6 in. (68.90mm x 142.24 mm) – low profile PCIe Auxiliary Cards Size: | |||
Connector: Single QSFP28 InfiniBand and Ethernet (copper and optical) | ||||
Protocol Support | InfiniBand: IBTA v1.3a | |||
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | ||||
Data Rate | InfiniBand | SDR/DDR/QDR/FDR/EDR | ||
Ethernet | 1/10/25/40/50/100 Gb/s | |||
PCI Express Gen3: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible) | ||||
ConnectX-5 Main Adapter Card Power | Voltage: 12V | |||
Power | Cable | |||
Typical Power b | Passive Cables | 17W | ||
Maximum Power | Passive Cables | 20W | ||
1.5W Active Cables | 21.6W | |||
2.5W Active Cables | 22.7W | |||
Maximum power available through QSFP28 port: 2.5W | ||||
PCIe Auxiliary Cards Power | Typical Power | 1.5W | ||
Maximum Power | 2W | |||
Airflow | Airflow | Cable Type | Airflow Direction (Heatsink to Port) | |
Passive Cable | 400LFM / 55°C | |||
NVIDIA 2.5W Active Cable | 400LFM / 55°C | |||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety: CB / cTUVus / CE | |||
EMC: CE / FCC / VCCI / ICES / RCM | ||||
RoHS compliant | ||||
a The ConnectX-5 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental feature only initiates when connected to another NVIDIA InfiniBand product.
b Typical power for ATIS traffic load.
c For both operational and non-operational states.
All dimensions are in millimeters. The PCB mechanical tolerance is +/- 0.13mm.
For the 3D Model of the card, please refer to http://www.nvidia.com/page/3d_models.
Adapter Card Mechanical Drawing (Component Side)
PCIe Auxiliary Card Mechanical Drawing (Component Side)
Short Brackets Mechanical Drawing
All dimensions are in millimeters. The bracket mechanical tolerance is +/- 0.25mm.
ConnectX-5 Main Adapter Card Short Bracket
PCIe Auxiliary Card Short Bracket