Changes and New Features

NVIDIA ConnectX-6 Adapter Cards Firmware Release Notes v20.41.1000
Note

SR-IOV - Virtual Functions (VF) per Port - The maximum Virtual Functions (VF) per port is 127. For further information, see Known Issues.

Note

It is recommended to enable the “above 4G decoding” BIOS setting for features that require large amount of PCIe resources.

Such features are: SR-IOV with numerous VFs, PCIe Emulated Switch, and Large BAR Requests.

Note

Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices' firmware to this release to improve the devices’ firmware security and reliability.

Note

When upgrading or changing the configuration on multi-host adapter cards, for the changes to take effect, PCIe restart must be simultaneously sent from both hosts (servers).

To do so, perform the following:

1. Shut down the server with the auxiliary card.

2. Shut down the server with the primary card.

3. Bring back the server with the primary card.

4. Bring back the server with the auxiliary card.

Feature/Change

Description

20.41.1000

Steering Match

Added support for steering match on packet l4_type through FTG/FTE.

Bug Fixes

See Bug Fixes in this Firmware Version section.

Unsupported Features

The following advanced feature are unsupported in the current firmware version:

  • The following service types:

    • SyncUMR

    • Mellanox transport

    • RAW IPv6

  • INT-A not supported for EQs only MSI-X

  • PCI VPD write flow (RO flow supported)

  • Streaming Receive Queue (STRQ) and collapsed CQ

  • Subnet Manager (SM) on VFs

  • RoCE LAG in Multi-Host/Socket-Direct

Unsupported Commands

  • QUERY_MAD_DEMUX

  • SET_MAD_DEMUX

  • CREATE_RQ - MEMORY_RQ_RMP

  • MODIFY_LAG_ASYNC_EVENT

© Copyright 2024, NVIDIA. Last updated on May 4, 2024.