Changes and New Features
Feature/Change | Description |
28.33.2028 | |
General | This is the initial firmware release of NVIDIA® ConnectX®-7 adapter cards. ConnectX-7 has the same feature set as ConnectX-6 adapter card.For the list of the ConnectX-6 firmware features, please see ConnectX-6 Firmware Release Notes. The features described here are new features in addition to the ConnectX-6 set. |
200Gb/s Throughput on Crypto Capable Devices | Enabled 200Gb/s out-of-the-box throughput on crypto capable devices. Note: If any crypto offloads is in use, 200Gb/s throughput can be achieved only after the next firmware reset |
VF Migration | Added support for VF migration. The hypervisor can now suspend its VF, meaning from that point the VF cannot perform action such as send/receive traffic or run any command. In this firmware version only the suspend resume mode is supported (on the same VM). |
MADs | Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port. |
VF Migration | Added support for VF migration. |
DCS Offload | [Beta] A single DCI can be connected to only one target at the time and cannot start new connection until the previous work request is completed. To avoid delays that occur when the initiator process needs to transfer data to multiple targets at the same time, a new offload process (DCS) is introduced to handle and spread the work request on many DCIs according to destinations. Note: In this firmware version, the following actions are not supported:
|
Strided KLM | Added support for large strided KLM (KLM is an MKEY asses mode which allows MKEYs usage with different window size). |
NV Configurations via the Relevant Reset Flow | Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software. |
ICM Pages | Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use. |
Livefish Mode | Enables the user to burn firmware via MTUSB when in livefish mode. |
Media Access Control Security Offload | Media Access Control Security Offload allows the NIC to accelerate Macsec operation. Macsec offload handles packets inline - as they go through the NIC. For inbound packets, the host receives plaintext packets (for instance MAC|ETH|IP|TCP) while on the network these packets are encrypted + authenticated and encapsulated within an SecTag header and vice versa for outbound packets. |
NetworkPort Schema Replacement | Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation. |
Steering Definer | Added support for creating a steering definer with a dword selector using create_match_definer_object and the "SELECT" format. |
XRQ QP Errors Enhancements | Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused |
HW Steering: WQE Insertion Rules | [Beta] Added HW Steering support for the following:
|
ibstat | Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore. |
Congestion Control | Enabled APU based programmable congestion control capability with multiple algorithm. |
ZTRCC | Added support for advanced ZTR_RTTCC algorithm based on the Programmable CC platform to achieve better congestion control without dependency on the switch ECN marking. |
SMPs | Disabled the option to send SMPs from unauthorized hosts. |
SW Steering Cache | Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command. |
Mega Allocations in Bulk Allocator Mechanism | Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter. |
SNAPI: Comm-Channel | Added support for SNAPI (comm-channel) connection while running on raw ETH link. |
Changing all the Crypto Features to Wrapped or Cleartext | Crypto features can be in either wrapped or unwrapped mode. Meaning, the key can be wrapped or in plaintext when running the CREATE_DEK PRM command. To comply with the requirements specified in FIPS publication, all the created DEKs must be wrapped. This feature adds new NV_CONFIG per device to control this mode, and enables the user to change all the crypto features to wrapped or cleartext. |
ICM Direct Access by the Software to write/modify the DEK Objects | [Beta] This new capability enables the software to directly access ICM and write/modify the DEK objects. Such change improves the DEK object update rate by re-using DEK object instead of creating a new one. In addition, added the following:
|
Page Tracking During VM Migration | To allow page tracking during VM migration, this new capability enables the user to mark all the modified pages and report them to the software, in order to copy the memory without stopping the VM, and only copy a small amount of pages (the ones that were modified in the last iteration) after stopping the VM. |