Bug Fixes History
Internal Ref. | Issue |
2969829 | Description: On rare occasions, the HDR speed link up time when using the optical module MFA7U10-H010 might take up to 70sec. |
Keywords: HDR, link up time, optical cable | |
Discovered in Version: 28.33.2028 | |
Fixed in Release: 28.33.4030 | |
3024199 | Description: When connecting a ConnectX-7 adapter card to an NVIDIA Quantum switch using the copper cable (MCP1600-E01AE30), the link is Down when in EDR speed. |
Keywords: EDR, copper cable, NVIDIA Quantum | |
Discovered in Version: 28.33.2028 | |
Fixed in Release: 28.33.4030 | |
2947588 | Description: Trying to query/burn the firmware using the flint utility when the image is pending (after firmware burn and before firmware reset), results in the action's failure. |
Keywords: flint, query/burn firmware | |
Discovered in Version: 28.33.2028 | |
Fixed in Release: 28.33.4030 | |
3047723 | Description: When changing the protocols from ETH to IB on two ConnectX-7 adapter cards connected to each other, the ports on both sides must be toggled to get the link up. |
Keywords: Linkup, port toggling, protocol change | |
Discovered in Version: 28.33.2028 | |
Fixed in Release: 28.33.4030 | |
3033874 | Description: Connecting a ConnectX-7 adapter card to either a ConnectX-5 adapter card or to an NVIDIA Spectrum switch system is supported only when using a 100GbE optic cables and when configuring ConnectX-5 or the NVIDIA Spectrum switch system to Force Mode. |
Keywords: Linkup connectivity | |
Discovered in Version: 28.33.2028 | |
Fixed in Release: 28.33.4030 |