HII iSCSI First Target Parameters
In the following menu, you can set the following options:
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
The boot Logical Unit Number (LUN) on the first iSCSI storage target. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the boot LUN in the root path for the first target. |
|
Value restrictions: |
The minimum integer value is 0 and the maximum is 18446744073709551615. |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
Enable/Disable connecting to the first iSCSI target. This will be ignored if both DHCP IP and DHCP Parameters are enabled in iSCSI general parameters. |
|
Configurable: |
Yes – built-in options |
|
Persistency: |
Persistent through AC cycle |
|
Available options: |
1 - Enabled 2 - Disabled |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
The iSCSI Qualified Name (IQN) of the first target |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the iSCSI Qualified name in the root path for the first target. |
|
Value restrictions: |
Maximum string length is 223 |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
The first iSCSI storage target Challenge-Handshake Authentication Protocol (CHAP) ID. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the Connect and the CHAP Authentication are enabled – This will be the username used for the first target Challenge-Handshake Authentication Protocol. |
|
Value restrictions: |
Maximum string length is 128. |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
The Challenge-Handshake Authentication Protocol secret (CHAP password) of the first iSCSI storage target. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the Connect and the CHAP Authentication are enabled – This will be the password used for the first target Challenge-Handshake Authentication Protocol. |
|
Value restrictions: |
String length should be 0 or 12 to 16 |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
The IP address of the first iSCSI target |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the IP address in the root path for the first target. |
|
Value restrictions: |
Should be in IPv4 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
The IPv6 address of the first iSCSI target |
|
Configurable: |
Yes |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over,and IPv4/IPv6 support is selected as IPv6, and Connect is enabled, this will be the IP address in the root path for the first target. |
|
Value restrictions: |
Should be in IPv6 format |
|
Location: |
System setup/Port main configurations/iSCSI Configuration/iSCSI First target Parameters |
|
Description: |
TCP Port number of first iSCSI target |
|
Configurable: |
Yes – via input |
|
Persistency: |
Persistent through AC cycle |
|
Effects: |
If the legacy boot protocol is iSCSI or iSCSI without fail-over, and Connect is enabled, this will be the TCP Port in the root path for the first target. |
|
Value restrictions: |
The minimum integer value is 1, and the maximum is 65535. |