NVIDIA Networking Server-Side Documentation of Flexboot v3.7.500 & UEFI v14.35.15
NVIDIA Networking Server-Side Documentation of Flexboot v3.7.500 & UEFI v14.35.15

HII iSCSI General Parameters

In the following menu, you can set the following options:

Note

This section's attributes are applicable only to Legacy mode.

worddav6551f50649f0da724316a3520d65ea15-version-1-modificationdate-1723452734533-api-v2.png

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Controls booting to ISCSI target after connection.

Configurable:

Yes

Available options:

  • Enable

  • Disable

  • One time disabled

Location:

Main Configuration Form /iSCSI Configuration/iSCSI General Parameters

Description:

When the TCP/IP Parameters via DHCP is enabled, the initiator and target's IP, netmask, gateway and DNS will be taken from DHCP instead of from the menu.

Configurable:

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

When iSCSI Parameters via DHCP are enabled, all the initiator and target's parameters are taken from DHCP instead of from the menu.

Configurable:

Yes, if TCP/IP Parameters via DHCP is enabled.

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Enables CHAP Authentication for iSCSI initiator.

Configurable:

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Enables mutual CHAP authentication between the iSCSI initiator and target

Configurable:

Yes

Location:

System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters

Description:

Specifies whether IPv4 or IPv6 network addressing will be used for iSCSI initiator and targets

Configurable:

No

© Copyright 2024, NVIDIA. Last updated on Aug 12, 2024.