Main Configuration
In the following menu, you can set the following options:
Blink LEDs will not appear in the boot menu if the feature is not supported by the firmware.
LEDs starts to blink as soon as you press the Enter key.
|
Location: |
System setup/Port main configurations |
|
Description: |
Specifies the number of seconds the LEDs on physical network port should blink to assist with port identification. Only valid for adapters with blink LEDs. |
|
Configurable: |
Yes – via input |
|
Persistency: |
Valid only for current cycle |
|
Effects: |
Blink LEDs duration value of the port will be as set in the current cycle |
|
Value restrictions: |
The minimum integer value is 0 and the maximum is 15. |
|
Location: |
System setup/Port main configurations |
|
Description: |
Permanent MAC address assigned during manufacturing |
|
Configurable: |
No |
|
Location: |
NIC Partitioning Configuration |
|
Description: |
Permanent Node GUID assigned during manufacturing. |
|
Configurable: |
No |
|
Availability: |
|
Location: |
NIC Partitioning Configuration |
|
Description: |
Permanent Port GUID assigned during manufacturing. |
|
Configurable: |
No |
|
Availability: |
|
Location: |
NIC Partitioning Configuration |
|
Description: |
Displays the Virtual Node GUID. |
|
Configurable: |
No |
|
Availability: |