NVIDIA Firmware Tools (MFT) Documentation v4.28
v4.28

Running mst in an Environment without a Kernel

mst can work even without kernel module being installed on the machine or if the kernel is down. In this case, the devices' names will be the PCI address of the devices.

Example:

Copy
Copied!
            

> mst status MST modules: ------------ MST PCI module is not loaded MST PCI configuration module is not loaded   PCI Devices: ------------ 05:00.0 08:00.0 82:00.0   > mst status -v MST modules: ------------ MST PCI module is not loaded MST PCI configuration module is not loaded     PCI devices: ------------ DEVICE_TYPE MST PCI RDMA NET NUMA ConnectX3Pro(rev:0) NA 05:00.0 mlx4_0 net-ib0,net-ib1 ConnectX4(rev:0) NA 08:00.0 mlx5_0 net-ib2 ConnectX4(rev:0) NA 08:00.1 mlx5_1 net-ib3 ConnectIB(rev:0) NA 82:00.0 mlx5_2 net-ib4,net-ib5

Note

The MST interface will be NA in mst status -v[v] output.

Run commands with these devices:

Copy
Copied!
            

> flint -d 08:00.0 q Image type: FS3 FW Version: 12.16.0048 FW Release Date: 14.3.2016 Description: UID GuidsNumber Base GUID: 7cfe90030029205e 4 Base MAC: 00007cfe9029205e 4 Image VSD: Device VSD: PSID: MT_2190110032

© Copyright 2024, NVIDIA. Last updated on May 15, 2024.