NVIDIA Docs Hub NVIDIA Networking Networking Software Switch Software NVIDIA MLNX-GW User Manual for NVIDIA Skyway Appliance v8.1.2000 User Management and Security Commands

v8.2.2200

	username <username> [capability <cap> \| disable [login \| password] \| disconnect \| full-name <name> \| nopassword \| password [0 \| 7] <password>] no username <username> [capability \| disable [login \| password] \| full-name] Creates a user and sets its capabilities, password and name. The no form of the command deletes the user configuration.
Syntax Description	username	Specifies a username and creates a user account. New users are created initially with admin privileges but is disabled. Allowed characters for the username: a-z A-Z 0-9 period (.), underscore (_), hyphen (-) Any single character or combination of characters from the above is allowed except for a period "." in a single form.
	capability <cap>	Defines user capabilities. admin—full administrative capabilities monitor—read only capabilities, can not change the running configuration unpriv—can only query the most basic information, and cannot take any actions or change any configuration v_admin—basic administrator capabilities
	disable [login \| password]	Disable—disable this account Disable login—disable all logins to this account Disable password—disable login to this account using a local password
	disconnect	Logs out the specified user from the system.
	name	Full name of the user.
	nopassword	The next login of the user will not require password.
	0 \| 7	0—specifies a login password in cleartext 7—specifies a login password in encrypted text
	password	Specifies a password for the user in string form. If [0 \| 7] was not specified then the password is in cleartext.
Default	The following usernames are available by default: admin monitor
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # username monitor full-name smith
Related Commands	show usernames show users
Notes	To enable a user account, just set a password on it (or use the command “username <user> nopassword” to enable it with no password required for login) Removing a user account does not terminate any current sessions that user has open; it just prevents new sessions from being established Encrypted password is useful for the command “show configuration”, since the cleartext password cannot be recovered after it is set The command "username <user> password <password>" or "username <user> password 0 <password>" are not security and will leave clear text in user's terminal (log and command history will be treated as sensitive information without clear text password). They are recommended to be replaced as "username <user> password" or "username <user> password" commands.

show usernames

	show usernames Displays list of users and their capabilities.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example
gateway (config) # show usernames USERNAME FULL NAME CAPABILITY ACCOUNT STATUS USERID System Administrator admin Local password login disabled admin System Administrator admin No password required for login monitor System Monitor monitor Password set (SHA512) root Root User admin No password required for login
Related Commands	username show users
Notes

show users

	show users [history] Displays logged in users and related information such as idle time and what host they have connected from.
Syntax Description	history	Displays current and historical sessions.
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example
gateway (config) # show users USERNAME FULL NAME LINE HOST IDLE admin System Administrator pts/0 172.22.237.174 0d0h34m4s admin System Administrator pts/1 172.30.0.127 1d3h30m49s admin System Administrator pts/3 172.22.237.34 0d0h0m0s gateway (config) #s how users history admin pts/3 172.22.237.34 Wed Feb 1 11:56 still logged in admin pts/3 172.22.237.34 Wed Feb 1 11:42 - 11:46 (00:04) wtmp begins Wed Feb 1 11:38:10 2012
Related Commands	username show usernames
Notes

show whoami

	show whoami Displays username and capabilities of user currently logged in.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example	gateway (config) # show whoami Current user: admin Capabilities: admin
Related Commands	username show usernames show users
Notes

password

	password [age expiration <days> \| age warning <days> \| history < length > \| length minimal <length> \| length maximal < length > \| username-password-match enable \| complexity-class <char class> \| hardening enable] Configures restrictions for new passwords.
Syntax Description	age expiration <days>	Specifies validity period of any password configured. Range: 0-365 days (0=password will not expire) Default: 365 days
	age warning <days>	Specifies how many days before expiration a warning message should be printed while logging in. Range: 0-30 days (0 indicates that a warning message will not be printed) Default: 15 days
	history < length >	Specifies how many passwords are saved per user. New password will be compared to previous passwords and will not be allowed if it is the same as an old one. Range: 0-20 passwords Default: 5 passwords
	length minimal <length>	Specifies minimal length of allowed password. Range: 1-32 characters Default: 8 characters
	length maximal < length>	Specifies maximal length of allowed password. Range: 64-80 characters Default: 64 characters
	username-password-match enable	Restricts user from having password identical to its username. Default: enabled The no form of this command will allow this.
	complexity-class <char class>	Specifies what characters must be used while configuring password. none—no restrictions lower lower-upper lower-upper-digit lower-upper-digit-special Special characters allowed are: `~!@#$%^&*()-_=+[{}];:',<.> Default: lower-upper-digit
	hardening enable	Enable password restrictions. If enabled, all the above will be checked upon every new password that is being configured. Password that does not meet the requirements will be rejected. The no form will disable any password restrictions and every password will be allowed.
Default	Enabled. After upgrade, the feature will be disabled by default.
Configuration Mode	Config
History	8.1.1000
Example	gateway (config) # password hardening enable
Related Commands	show password hardening
Notes

show password hardening

	show password hardening Displays all the configured password restrictions settings.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any command mode
History	8.1.1000
Example	gateway (config) # show password hardening Password settings: Password hardening : enabled Min password length : 8 (characters) Max password length : 64 (characters) Character class : Lowercase, uppercase and digits Password history length : 5 Different username and password: yes Password aging : enabled Expiration warning message : 15 (days) Password age : 365 (days) gateway(config) # show password hardening Password settings: Password hardening : disabled
Related Commands	password
Notes	Wizard will prompt for enabling/disabling password hardening Configuring password 7 while password hardening is enabled, will disable it

AAA Methods

aaa accounting

	aaa accounting changes default stop-only tacacs+ no aaa accounting changes default stop-only tacacs+ Enables logging of system changes to an AAA accounting server. The no form of the command disables the accounting.
Syntax Description	N/A
Default	N/A
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa accounting changes default stop-only tacacs+
Related Commands	show aaa
Notes	TACACS+ is presently the only accounting service method supported Change accounting covers both configuration changes and system actions that are visible under audit logging, however this feature operates independently of audit logging, so it is unaffected by the commands “logging level audit mgmt” or “configuration audit” Configured TACACS+ servers are contacted in the order in which they appear in the configuration until one accepts the accounting data, or the server list is exhausted Despite the name of the “stop-only” keyword, which indicates that this feature logs a TACACS+ accounting “stop” message, and in contrast to configuration change accounting, which happens after configuration database changes, system actions are logged when the action is started, not when the action has completed

aaa authentication login

	aaa authentication login default <auth method> [<auth method> [<auth method> [<auth method> [<auth method>]]]] no aaa authentication login Sets a sequence of authentication methods. Up to four methods can be configured. The no form of the command resets the configuration to its default.
Syntax Description	auth-method	local radius tacacs+ ldap
Default	local
Configuration Mode	Any command mode
History	8.0.0100
Example	gateway (config) # aaa authentication login default local radius tacacs+ ldap
Related Commands	show aaa
Notes	The order in which the methods are specified is the order in which the authentication is attempted. It is recommended that “local” is one of the methods selected.

aaa authentication attempts fail-delay

	aaa authentication attempts fail-delay <time> no aaa authentication attempts fail-delay Configures delay for a specific period of time after every authentication failure. The no form of the command resets the fail-delay to its default value.
Syntax Description	time	Range: 0-60 seconds
Default	0
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authentication attempts fail-delay 1
Related Commands
Notes

aaa authentication attempts track

	aaa authentication attempts track {downcase \| enable} no aaa authentication attempts track {downcase \| enable} Configure tracking for failed authentication attempts. The no form of the command clears configuration for tracking authentication failures.
Syntax Description	downcase	Does not convert all usernames to lowercase (for authentication failure tracking purposes only).
Syntax Description	enable	Disables tracking of failed authentication attempts.
Default	N/A
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authentication attempts track enable
Related Commands
Notes	This is required for the lockout functionality described below, but can also be used on its own for informational purposes. Disabling tracking does not clear any records of past authentication failures, or the locks in the database. However, it does prevent any updates to this database from being made: no new failures are recorded. It also disables lockout, preventing new lockouts from being recorded and existing lockouts from being enforced.

aaa authentication attempts lockout

	aaa authentication attempts lockout {enable \| lock-time \| max-fail \| unlock-time} no aaa authentication attempts lockout {enable \| lock-time \| max-fail \| unlock-time} Configures lockout of accounts based on failed authentication attempts. The no form of the command clears configuration for lockout of accounts based on failed authentication attempts.
Syntax Description	enable	Enables locking out of user accounts based on authentication failures. This both suspends enforcement of any existing lockouts, and prevents any new lockouts from being recorded. If lockouts are later re-enabled, any lockouts that had been recorded previously resume being enforced; but accounts which have passed the max-fail limit in the meantime are NOT automatically locked at this time. They would be permitted one more attempt, and then locked, because of how the locking is done: lockouts are applied after an authentication failure, if the user has surpassed the threshold at that time. Lockouts only work if tracking is enabled. Enabling lockouts automatically enables tracking. Disabling tracking automatically disables lockouts.
	lock-time	Sets maximum permitted consecutive authentication failures before locking out users. Unlike the “max-fail” setting, this does take effect immediately for all accounts. If both unlock-time and lock-time are set, the unlock-time must be greater than the lock-time. This is not based on the number of consecutive failures, and is therefore divorced from most of the rest of the tally feature, except for the tracking of the last login failure.
	max-fail	Sets maximum permitted consecutive authentication failures before locking out users. This setting only impacts what lockouts are imposed while the setting is active; it is not retroactive to previous logins. So if max-fail is disabled or changed, this does not immediately cause any users to be changed from locked to unlocked or vice versa.
	unlock-time	Enables the auto-unlock of an account after a specified number of seconds if a user account is locked due to authentication failures, counting from the last valid login attempt. Unlike the “max-fail” setting, this does take effect immediately for all accounts. If both unlock-time and lock-time are set, the unlock-time must be greater than the lock-time. Careful with disabling the unlock-time, particularly if you have max-fail set to something, and have not overridden the behavior for the admin (i.e. they are subject to lockouts also). If the admin account gets locked out, and there are no other administrators who can aid, the user may be forced to boot single-user and use the pam_tallybyname command-line utility to unlock your account manually. Even if one is careful not to incur this many authentication failures, it makes the system more subject to DOS attacks.
Default	N/A
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authentication attempts lockout enable
Related Commands
Notes

aaa authentication attempts class-override

	aaa authentication attempts class-override {admin [no-lockout] \| unknown {no-track \| hash-username}} no aaa authentication attempts class-override {admin \| unknown {no-track \| hash-username}} Overrides the global settings for tracking and lockouts for a type of account. The no form of the command removes this override and lets the admin be handled according to the global settings.
Syntax Description	admin	Overrides the global settings for tracking and lockouts for the admin account. This applies only to the single account with the username “admin”. It does not apply to any other users with administrative privileges.
	no-lockout	Prevents the admin user from being locked out though authentication failure history is still tracked (if tracking is enabled overall).
	unknown	Overrides the global settings for tracking and lockouts for unknown accounts. The “unknown” class here contains the following categories: Real remote usernames which simply failed authentication Mis-typed remote usernames Passwords accidentally entered as usernames Bogus usernames made up as part of an attack on the system
	hash-username	Applies a hash function to the username and stores the hashed result in lieu of the original
	no-track	Does not track authentication for such users (which of course also implies no-lockout)
Default	N/A
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authentication attempts class-override admin no-lockout
Related Commands
Notes

aaa authentication attempts reset

	aaa authentication attempts reset {all \| user <username>} [{no-clear-history \| no-unlock}] Clears the authentication history for and/or unlocks specified users.
Syntax Description	all	Applies function to all users
	user	Applies function to a specific user
	no-clear-history	Leaves the history of login failures but unlocks the account
	no-unlock	Leaves the account locked but clears the history of login failures
Default	N/A
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authentication attempts reset user admin all
Related Commands
Notes

clear aaa authentication attempts

	clear aaa authentication attempts {all \| user <username>} [no-clear-history \| no-unlock] Clears the authentication history for and/or unlocks specified users.
Syntax Description	all	Applies function to all users.
	user	Applies function to a specific user.
	no-clear-history	Clears the history of login failures.
	no-unlock	Unlocks the account.
Default	N/A
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authentication attempts reset user admin no-clear-history
Related Commands
Notes

aaa authorization

	aaa authorization map [default-user <username> \| order <policy> \| fallback] no aaa authorization map [default-user \| order \| fallback] Sets the mapping permissions of a user in case a remote authentication is done. The no form of the command resets the attributes to default.
Syntax Description	username	Specifies what local account the authenticated user will be logged on as when a user is authenticated (via RADIUS or TACACS+ or LDAP) and does not have a local account. If the username is local, this mapping is ignored.
	order <policy>	Sets the user mapping behavior when authenticating users via RADIUS or TACACS+ or LDAP to one of three choices. The order determines how the remote user mapping behaves. If the authenticated username is valid locally, no mapping is performed. The setting has the following three possible behaviors: local-only—maps all remote users to the user specified by the command “aaa authorization map default-user <user name>”. Any vendor attributes received by an authentication server are ignored. remote-first—if a local-user mapping attribute is returned and it is a valid local username, it maps the authenticated user to the local user specified in the attribute. Otherwise, it uses the user specified by the default-user command. remote-only—maps a remote authenticated user if the authentication server sends a local-user mapping attribute. If the attribute does not specify a valid local user, no further mapping is tried.
	fallback	Sets the authenticating fallback behavior via RADIUS or TACACS+ or LDAP. This option attempts to authenticate username through the next authentication method listed in case of an error. server-err—performs fallback if an error occurs while connecting to remote AAA server (e.g., server is down, not responding, and so forth)
Default	Default user—admin Map order—remote-first Order fallback—server-err
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # aaa authorization map default-user admin
Related Commands	show aaa username
Notes	If, for example, the user is locally defined to have admin permission, but in a remote server such as RADIUS the user is authenticated as monitor and the order is remote-first, then the user is given monitor permissions. The user must be careful when disabling AAA authorization map fallback server-err, because if the remote server stops working then the user may lock themselves out.

show aaa

	show aaa Displays the AAA configuration.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example	gateway (config) # show aaa AAA authorization: Default User: admin Map Order: remote-first Fallback on server-err: yes Authentication method(s): local Accounting method(s): tacacs+
Related Commands	aaa accounting aaa authentication aaa authorization show aaa show usernames username
Notes

show aaa authentication attempts

	show aaa authentication attempts [configured \| status user <username>]] Displays the current authentication, authorization and accounting settings.
Syntax Description	authentication attempts	Displays configuration and history of authentication failures.
	configured	Displays configuration of authentication failure tracking.
	status user	Displays status of authentication failure tracking and lockouts for specific user.
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example
gateway (config) # show aaa authentication attempts Configuration for authentication failure tracking and locking: Track authentication failures: yes Lock accounts based on authentication failures: yes Override treatment of 'admin' user: (none) Override treatment of unknown usernames: hash-usernames Convert usernames to lowercase for tracking: no Delay after each auth failure (fail delay): none Configuration for lockouts based on authentication failures: Lock account after consecutive auth failures: 5 Allow retry on locked accounts (unlock time): after 15 second(s) Temp lock after each auth failure (lock time): none Username Known Locked Failures Last fail time Last fail from -------- ----- ------ -------- -------------- -------------- 0Q72B43EHBKT8CB5AF5PGRX3U3B3TUL4CYJP93N() no no 1 2020/05/20 14:29:19 ttyS0 () Hashed for security reasons
Related Commands
Notes

RADIUS

radius-server

	radius-server {key <secret>\| retransmit <retries> \| timeout <seconds>} no radius-server {key \| retransmit \| timeout} Sets global RADIUS server attributes. The no form of the command resets the attributes to their default values.
Syntax Description	secret	Sets a secret key (shared hidden text string), known to the system and to the RADIUS server.
	retries	Number of retries (0-5) before exhausting from the authentication.
	seconds	Timeout in seconds between each retry (1-60).
Default	3 seconds, 1 retry
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # radius-server retransmit 3
Related Commands	aaa authorization radius-server host show radius
Notes	Each RADIUS server can override those global parameters using the command “radius-server host”.

radius-server host

	radius-server host <IP address> [enable \| auth-port <port> \| key <secret> \| prompt-key \| retransmit <retries> \| timeout <seconds>\| cipher <none \| eap-peap> ] no radius-server host <IP address> [auth-port \| enable \| cipher] Configures RADIUS server attributes. The no form of the command resets the attributes to their default values and deletes the RADIUS server.
Syntax Description	IP address	RADIUS server IP address
	enable	Administrative enable of the RADIUS server
	auth-port	Configures authentication port to use with this RADIUS server
	port	RADIUS server UDP port number
	key	Configures shared secret to use with this RADIUS server
	prompt-key	Prompt for key, rather than entering on command line
	retransmit	Configures retransmit count to use with this RADIUS server
	retries	Number of retries (0-5) before exhausting from the authentication
	timeout	Configures timeout between each try
	seconds	Timeout in seconds between each retry (1-60)
	cipher	Configures which cipher to use for communication encryption <none \| eap-peap>
Default	3 seconds, 1 retry Default UDP port is 1812
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # radius-server host fe80::202:b3ff:fe1e:8329 gateway (config) # radius-server host 40.40.40.40
Related Commands	aaa authorization radius-server show radius
Notes	RADIUS servers are tried in the order they are configured If you do not specify a parameter for this configured RADIUS server, the configuration will be taken from the global RADIUS server configuration. Refer to the command “radius-server”.

show radius

	show radius Displays RADIUS configurations.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example	gateway (config) # show radius RADIUS defaults: Key : ****** Timeout : 3 Retransmit : 1 RADIUS servers: 1.1.1.1:1812 : Enabled : yes Key : **** Timeout : 3 (default) Retransmit : 1 (default) Cipher : none 40.40.40.40:1812: Enabled : yes Key : ****** Timeout : 3 (default) Retransmit : 1 (default)
Related Commands	aaa authorization radius-server radius-server host
Notes

TACACS+

tacacs-server

	tacacs-server {key <secret>\| retransmit <retries> \| timeout <seconds>} no tacacs-server {key \| retransmit \| timeout} Sets global TACACS+ server attributes. The no form of the command resets the attributes to default values.
Syntax Description	secret	Set a secret key (shared hidden text string), known to the system and to the TACACS+ server.
	retries	Number of retries (0-5) before exhausting from the authentication.
	seconds	Timeout in seconds between each retry. Reang: 1-60
Default	3 seconds, 1 retry
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # tacacs-server retransmit 3
Related Commands	aaa authorization show radius show tacacs tacacs-server host
Notes	Each TACACS+ server can override those global parameters using the command “tacacs-server host”.

tacacs-server host

	tacacs-server host <IP address> {enable \| auth-port <port> \| auth-type <type> \| key <secret> \| prompt-key \| retransmit <retries> \| timeout <seconds>} no tacacs-server host <IP address> {enable \| auth-port} Configures TACACS+ server attributes. The no form of the command resets the attributes to their default values and deletes the TACACS+ server.
Syntax Description	IP address	TACACS+ server IP address.
	enable	Administrative enable for the TACACS+ server.
	auth-port	Configures authentication port to use with this TACACS+ server.
	port	TACACS+ server UDP port number.
	auth-type	Configures authentication type to use with this TACACS+ server.
	type	Authentication type. Possible values are: ASCII PAP (Password Authentication Protocol)
	key	Configures shared secret to use with this TACACS+ server.
	secret	Sets a secret key (shared hidden text string), known to the system and to the TACACS+ server.
	prompt-key	Prompts for key, rather than entering key on command line.
	retransmit	Configures retransmit count to use with this TACACS+ server.
	retries	Number of retries (0-5) before exhausting from the authentication.
	timeout	Configures timeout to use with this TACACS+ server.
	seconds	Timeout in seconds between each retry. Range: 1-60
Default	3 seconds, 1 retry Default TCP port is 49 Default auth-type is PAP
Configuration Mode	config
History	8.0.0100
Example	gateway (config) # tacacs-server host 40.40.40.40
Related Commands	aaa authorization show tacacs tacacs-server
Notes	TACACS+ servers are tried in the order they are configured A PAP auth-type similar to an ASCII login, except that the username and password arrive at the network access server in a PAP protocol packet instead of being typed in by the user, so the user is not prompted If the user does not specify a parameter for this configured TACACS+ server, the configuration will be taken from the global TACACS+ server configuration. Refer to the command “tacacs-server”.

show tacacs

	show tacacs Displays TACACS+ configurations.
Syntax Description	N/A
Default	N/A
Configuration Mode	Any command mode
History	8.0.0100
Example	gateway (config) # show tacacs TACACS+ defaults: Key : ****** Timeout : 3 Retransmit: 1 TACACS+ servers: 1.1.1.1:49: Enabled : yes Auth Type : pap Key : ****** Timeout : 3 (default) Retransmit: 1 (default)
Related Commands	aaa authorization tacacs-server tacacs-server host
Notes

On This Page

User Management and Security Commands

User Accounts

username

show usernames

show users

show whoami

password

show password hardening

AAA Methods

aaa accounting

aaa authentication login

aaa authentication attempts fail-delay

aaa authentication attempts track

aaa authentication attempts lockout

aaa authentication attempts class-override

aaa authentication attempts reset

clear aaa authentication attempts

aaa authorization

show aaa

show aaa authentication attempts

RADIUS

radius-server

radius-server host

show radius

TACACS+

tacacs-server

tacacs-server host

show tacacs