NVIDIA MLNX_OFED Documentation Rev 5.1-2.6.2.0
v5.17

Introduction

This manual is intended for system administrators responsible for the installation, configuration, management and maintenance of the software and hardware of VPI (InfiniBand, Ethernet) adapter cards. It is also intended for application developers.

Mellanox OFED is a single Virtual Protocol Interconnect (VPI) software stack which operates across all Mellanox network adapter solutions supporting the following uplinks to servers:

Uplink/NICs

Driver Name

Uplink Speed

ConnectX®-4

mlx5

  • InfiniBand: SDR, QDR, FDR, FDR10, EDR

  • Ethernet: 1GbE, 10GbE, 25GbE, 40GbE, 50GbE, 56GbE1, 100GbE

ConnectX-4 Lx

  • Ethernet: 1GbE, 10GbE, 25GbE, 40GbE, 50GbE

ConnectX-5/ConnectX-5 Ex

  • InfiniBand: SDR, QDR, FDR, FDR10, EDR

  • Ethernet: 1GbE, 10GbE, 25GbE, 40GbE, 50GbE, 100GbE

ConnectX-6

  • InfiniBand: SDR, FDR, EDR, HDR

  • Ethernet: 10GbE, 25GbE, 40GbE, 50GbE2, 100GbE2, 200GbE2

ConnectX-6 Dx

  • Ethernet: 10GbE, 25GbE, 40GbE, 50GbE2, 100GbE2, 200GbE2

ConnectX-6 Lx

  • Ethernet: 1GbE, 10GbE, 25GbE, 40GbE, 50GbE2

Innova™ IPsec EN

  • Ethernet: 10GbE, 40GbE

BlueField®

  • InfiniBand: SDR, QDR, FDR, FDR10, EDR

  • Ethernet: 1GbE, 10GbE, 25GbE, 40GbE, 50GbE, 100GbE

BlueField®-2 (beta)

  • InfiniBand: SDR, FDR, EDR, HDR

  • Ethernet: 1GbE, 10GbE, 25GbE, 40GbE, 50GbE2, 100GbE2

  1. 56GbE is a Mellanox propriety link speed can be achieved while connecting a Mellanox adapter card to
    Mellanox SX10XX switch series, or connecting a Mellanox adapter card to another Mellanox adapter card.

  2. Supports both NRZ PAM4 modes.

All Mellanox network adapter cards are compatible with OpenFabrics-based RDMA protocols and software and are supported by major operating system distributions.

Mellanox OFED is certified with the following products:

  • Mellanox Messaging Accelerator (VMA™) software: Socket acceleration library that performs OS bypass for standard socket-based applications.
    Please note, VMA support is provided separately from Mellanox OFED support. For further information, please refer to the VMA documentation (https://docs.mellanox.com/category/vma).

  • Mellanox Unified Fabric Manager (UFM®) software: Powerful platform for managing demanding scale-out computing fabric environments, built on top of the OpenSM industry standard routing engine.

  • Fabric Collective Accelerator (FCA) - FCA is a Mellanox MPI-integrated software package that utilizes CORE-Direct technology for implementing the MPI collectives communications.

The figure below shows a diagram of the Mellanox OFED stack, and how upper layer protocols (ULPs) interface with the hardware and with the kernel and userspace. The application level also shows the versatility of markets that Mellanox OFED applies to.

image2019-1-10_10-55-56.png

The following subsections briefly describe the various components of the Mellanox OFED stack.

mlx4 VPI Driver

Warning

This driver is no longer supported in MLNX_OFED. To work with ConnectX-3 and ConnectX-3 Pro NICs, please refer to MLNX_OFED LTS version available on the web.

mlx5 Driver

mlx5 is the low-level driver implementation for the Connect-IB® and ConnectX®-4 and above adapters designed by Mellanox Technologies. ConnectX®-4 and above adapter cards operate as a VPI adapter (Infiniband and Ethernet). The mlx5 driver is comprised of the following kernel modules:

Warning

Please note that Connect-IB card is no longer supported in MLNX_OFED. To work with this card, please refer to MLNX_OFED LTS version available on the web.

mlx5_core

Acts as a library of common functions (e.g. initializing the device after reset) required by ConnectX®-4 and above adapter cards. mlx5_core driver also implements the Ethernet interfaces for ConnectX®-4 and above. mlx5 drivers do not require the mlx5_en module as the Ethernet functionalities are built-in in the mlx5_core module.

mlx5_ib

Handles InfiniBand-specific functions and plugs into the InfiniBand mid layer.

libmlx5

libmlx5 is the provider library that implements hardware specific user-space functionality. If there is no compatibility between the firmware and the driver, the driver will not load and a message will be printed in the dmesg.

The following are the libmlx5 Legacy and RDMA-Core environment variables:

  • MLX5_FREEZE_ON_ERROR_CQE

    • Causes the process to hang in a loop of completion with error, which is not flushed with error or retry exceeded occurs/

    • Otherwise disabled

  • MLX5_POST_SEND_PREFER_BF

    • Configures every work request that can use blue flame will use blue flame

  • Otherwise - blue flame depends on the size of the message and inline indication in the packet

  • MLX5_SHUT_UP_BF

    • Disables blue flame feature

    • Otherwise - do not disable

  • MLX5_SINGLE_THREADED

    • All spinlocks are disabled

    • Otherwise - spinlocks enabled

    • Used by applications that are single threaded and would like to save the overhead of taking spinlocks.

  • MLX5_CQE_SIZE

    • 64 - completion queue entry size is 64 bytes (default)

    • 128 - completion queue entry size is 128 bytes

  • MLX5_SCATTER_TO_CQE

    • Small buffers are scattered to the completion queue entry and manipulated by the driver. Valid for RC transport.

    • Default is 1, otherwise disabled

The following are libmlx5 Legacy only environment variables:

  • MLX5_ENABLE_CQE_COMPRESSION

    • Saves PCIe bandwidth by compressing a few CQEs into a smaller amount of bytes on PCIe. Setting this variable enables CQE compression.

    • Default value 0 (disabled)

  • MLX5_RELAXED_PACKET_ORDERING_ON
    See “Out-of-Order (OOO) Data Placement” section.

Mid-layer Core

Core services include management interface (MAD), connection manager (CM) interface, and Subnet Administrator (SA) interface. The stack includes components for both user-mode and kernel applications. The core services run in the kernel and expose an interface to user-mode for verbs, CM and management.

Upper Layer Protocols (ULPs)

IP over IB (IPoIB)

The IP over IB (IPoIB) driver is a network interface implementation over InfiniBand. IPoIB encapsulates IP datagrams over an InfiniBand connected or datagram transport service. IPoIB pre-appends the IP datagrams with an encapsulation header and sends the outcome over the InfiniBand transport service. The transport service is Unreliable Datagram (UD) by default, but it may also be configured to be Reliable Connected (RC), in case RC is supported. The interface supports unicast, multicast and broadcast. For details, see “IP over InfiniBand (IPoIB)” section.

iSCSI Extensions for RDMA (iSER)

iSCSI Extensions for RDMA (iSER) extends the iSCSI protocol to RDMA. It permits data to be transferred directly into and out of SCSI buffers without intermediate data copies. For further information, please refer to “iSCSI Extensions for RDMA (iSER)” section.

SCSI RDMA Protocol (SRP)

SCSI RDMA Protocol (SRP) is designed to take full advantage of the protocol offload and RDMA features provided by the InfiniBand architecture. SRP allows a large body of SCSI software to be readily used on InfiniBand architecture. The SRP driver—known as the SRP Initiator—differs from traditional low-level SCSI drivers in Linux. The SRP Initiator does not control a local HBA; instead, it controls a connection to an I/O controller—known as the SRP Target—to provide access to remote storage devices across an InfiniBand fabric. The SRP Target resides in an I/O unit and provides storage services. See “SRP - SCSI RDMA Protocol” section.

User Direct Access Programming Library (uDAPL)

User Direct Access Programming Library (uDAPL) is a standard API that promotes data center application data messaging performance, scalability, and reliability over RDMA interconnects InfiniBand and RoCE. The uDAPL interface is defined by the DAT collaborative. This release of the uDAPL reference implementation package for both DAT 1.2 and 2.0 specification is timed to coincide with OFED release of the Open Fabrics (www.openfabrics.org) software stack.

MPI

Message Passing Interface (MPI) is a library specification that enables the development of parallel software libraries to utilize parallel computers, clusters, and heterogeneous networks. Mellanox OFED includes the following MPI implementation over InfiniBand:

  • Open MPI – an open source MPI-2 implementation by the Open MPI Project

Mellanox OFED also includes MPI benchmark tests such as OSU BW/LAT, Intel MPI BeBenchmarkand Presta.

InfiniBand Subnet Manager

All InfiniBand-compliant ULPs require a proper operation of a Subnet Manager (SM) running on the InfiniBand fabric, at all times. An SM can run on any node or on an IB switch. OpenSM is an InfiniBand-compliant Subnet Manager, and it is installed as part of Mellanox OFED1.

1. OpenSM is disabled by default. See “OpenSM” section for details on enabling it.

Diagnostic Utilities

Mellanox OFED includes the following two diagnostic packages for use by network and data center managers:

  • ibutils – Mellanox Technologies diagnostic utilities

  • infiniband-diags – OpenFabrics Alliance InfiniBand diagnostic tools

Mellanox Firmware Tools

The Mellanox Firmware Tools (MFT) package is a set of firmware management tools for a single InfiniBand node. MFT can be used for:

  • Generating a standard or customized Mellanox firmware image

  • Burning a firmware image to a single InfiniBand node

MFT includes a set of tools used for performing firmware update and configuration, as well as debug and diagnostics, and provides MST service. For the full list of available tools within MFT, please refer to MFT documentation (https://docs.mellanox.com/category/mft).

ISO Image

Mellanox OFED for Linux (MLNX_OFED_LINUX) is provided as ISO images or as a tarball, one per supported Linux distribution and CPU architecture, that includes source code and binary RPMs, firmware, utilities, and documentation. The ISO image contains an installation script (called mlnxofedinstall) that performs the necessary steps to accomplish the following:

  • Discover the currently installed kernel

  • Uninstall any InfiniBand stacks that are part of the standard operating system distribution or another vendor's commercial stack

  • Install the MLNX_OFED_LINUX binary RPMs (if they are available for the current kernel)

  • Identify the currently installed InfiniBand HCAs and perform the required firmware updates

Software Components

MLNX_OFED_LINUX contains the following software components:

  • Mellanox Host Channel Adapter Drivers

    • mlx5

      • mlx5_ib

      • mlx5_core (includes Ethernet)

  • Mid-layer core

    • Verbs, MADs, SA, CM, CMA, uVerbs, uMADs

  • Upper Layer Protocols (ULPs)

    • IPoIB, SRP Initiator and SRP

  • MPI

    • Open MPI stack supporting the InfiniBand, RoCE and Ethernet interfaces

    • MPI benchmark tests (OSU BW/LAT, Intel MPI Benchmark, Presta)

  • OpenSM: InfiniBand Subnet Manager

  • Utilities

  • Firmware tools (MFT)

  • Source code for all the OFED software modules (for use under the conditions mentioned in the modules' LICENSE files)

  • Documentation

Firmware

The ISO image includes the following firmware item:

  • mlnx-fw-updater RPM/DEB package, which contains firmware binaries for supported devices (using mlxfwmanager tool).

Directory Structure

The ISO image of MLNX_OFED_LINUX contains the following files and directories:

  • mlnxofedinstall - This is the MLNX_OFED_LINUX installation script.

  • ofed_uninstall.sh - This is the MLNX_OFED_LINUX un-installation script.

  • <RPMS folders> - Directory of binary RPMs for a specific CPU architecture.

  • src/ - Directory of the OFED source tarball.

Warning

MLNX_OFED includes the OFED source RPM packages used as a build platform for kernel code but does not include the sources of Mellanox proprietary packages.

  • mlnx_add_kernel_support.sh - Script required to rebuild MLNX_OFED_LINUX for customized kernel version on supported Linux Distribution

  • RPM based - A script required to rebuild MLNX_OFED_LINUX for customized kernel version on supported RPM-based Linux Distribution

  • docs/ - Directory of Mellanox OFED related documentation

mlx5_core Module Parameters

The mlx5_core module supports a single parameter used to select the profile which defines the number of resources supported.

prof_sel

The parameter name for selecting the profile. The supported values for profiles are:

  • 0 - for medium resources, medium performance

  • 1 - for low resources

  • 2 - for high performance (int) (default)

guids

charp

node_guid

guids configuration. This module parameter will be obsolete!

debug_mask

debug_mask: 1 = dump cmd data, 2 = dump cmd exec time, 3 = both. Default=0 (uint)

probe_vf

probe VFs or not, 0 = not probe, 1 = probe. Default = 1 (bool)

num_of_groups

Controls the number of large groups in the FDB flow table.

Default=4; Range=1-1024

ib_core Parameters

send_queue_size

Size of send queue in number of work requests (int)

recv_queue_size

Size of receive queue in number of work requests (int)

force_mr

Force usage of MRs for RDMA READ/WRITE operations (bool)

roce_v1_noncompat_gid

Default GID auto configuration (Default: yes) (bool)

ib_ipoib Parameters

max_nonsrq_conn_qp

Max number of connected-mode QPs per interface (applied only if shared receive queue is not available) (int)

mcast_debug_level

Enable multicast debug tracing if > 0 (int)

send_queue_size

Number of descriptors in send queue (int)

recv_queue_size

Number of descriptors in receive queue (int)

debug_level

Enable debug tracing if > 0 (int)

ipoib_enhanced

Enable IPoIB enhanced for capable devices (default = 1) (0-1) (int)

Normally, an application needs to query the device capabilities before attempting to create a resource. It is essential for the application to be able to operate over different devices with different capabilities.

Specifically, when creating a QP, the user needs to specify the maximum number of outstanding work requests that the QP supports. This value should not exceed the queried capabilities. However, even when you specify a number that does not exceed the queried capability, the verbs can still fail since some other factors such as the number of scatter/gather entries requested, or the size of the inline data required, affect the maximum possible work requests. Hence an application should try to decrease this size (halving is a good new value) and retry until it succeeds.

© Copyright 2023, NVIDIA. Last updated on Oct 23, 2023.