Bug Fixes History
Internal Ref. |
Issues |
|
1834740 |
Description: Fixed an issue that resulted in high BER when using optical module with module firmware older than 37.50.316. |
|
Keywords: Optical cables, BER, cables firmware |
||
Discovered in Version: 27.2000.2182 |
||
Fixed in Release: 27.2000.2306 |
||
1899441 |
Description: Fixed an issue that caused the packets to be transmitted from a wrong output port due to a wrong configuration of the packet classification decision in the switch forwarding database cache key, that caused both AR eligible packets and AR ineligible packets to hit the same cache entry. |
|
Keywords: Switch forwarding, Adaptive Routing |
||
Discovered in Version: 27.2000.2046 |
||
Fixed in Release: 27.2000.2182 |
||
1885460 |
Description: On rare occasions, and under high SHARP load, switch SHARP operation might get stuck. |
|
Keywords: SHARP |
||
Discovered in Version: 27.2000.2046 |
||
Fixed in Release: 27.2000.2182 |
||
1859715 |
Description: The bandwidth on MFS1S00-H050E cables is 99G/s and on MFS1S00-H100E cables is 67Gb/s when connecting at HDR speed to an HDR switch. |
|
Keywords: Cables |
||
Discovered in Version: 27.2000.1886 |
||
Fixed in Release: 27.2000.2046 |
||
1797452 |
Description: A port may hang while Link-Maintenance runs on it and the second port’s link is toggled. |
|
Keywords: Link-Maintenance, port toggling |
||
Discovered in Version: 27.2000.1600 |
||
Fixed in Release: 27.2000.1886 |
||
1698990 |
Description: HDR link up time when using optical cables may take 6 minutes or more (up to 20 minutes). |
|
Keywords: HDR, optical cables, link up times |
||
Discovered in Version: 27.2000.1100 |
||
Fixed in Release: 27.2000.1886 |
||
1718734/ 1723236/ 1718645/ 1710631 |
Description: On rare occasions, HDR link may not raise properly when using optical cables. |
|
Keywords: HDR link |
||
Discovered in Version: 27.2000.1012 |
||
Fixed in Release: 27.2000.1600 |
||
1774870 |
Description: Link flapping and packet loss during High/Low temperature changes. |
|
Keywords: Link |
||
Discovered in Version: 27.2000.1400 |
||
Fixed in Release: 27.2000.1600 |
||
1778837 |
Description: When using a copper splitter cable up to 2m length in HDR100 mode, traffic may drop. |
|
Keywords: Cable, HDR100 |
||
Discovered in Version: 27.2000.1400 |
||
Fixed in Release: 27.2000.1600 |
||
1534459 |
Description: When working with 8 VLs, TP does not function due to buffers’ configuration. |
|
Keywords: VLs, latency, performance |
||
Discovered in Version: 27.2000.1100 |
||
Fixed in Release: 27.2000.1400 |
||
1605587 |
Description: Fixed an issue that cause the green port LED to blink in the same frequency regardless of the link speed rate set. |
|
Keywords: Port LED |
||
Discovered in Version: 27.1910.0618 |
||
Fixed in Release: 27.2000.1142 |
||
1598550 |
Description: Fixed an issue that prevented the port from being split when the request (command) was sent from the NV config tool. |
|
Keywords: Split Port |
||
Discovered in Version: 27.1910.0618 |
||
Fixed in Release: 27.1910.0620 |