Firmware Compatible Products
These are the release notes for the Mellanox Quantum™ firmware. This firmware complements the Mellanox Quantum™ switch with a set of advanced features, allowing easy and remote management of the switch.
This firmware supports the following protocols:
InfiniBand - SDR, QDR, FDR EDR, HDR
This firmware supports the devices listed in the table below:
|
Model Number |
Description |
|
MQM8790 |
Mellanox Quantum ™ 40-port Non-blocking Externally Managed HDR 200Gb/s InfiniBand Smart Switch |
This firmware version has been validated to work against platforms with the following firmware and software versions.
|
HCA/Switch |
Firmware Version |
|
Quantum |
27.2000.2626 |
|
Switch-IB |
11.2000.2046 |
|
Switch-IB 2 |
15.2000.2046 |
|
ConnectX®-6 |
20.26.1040 |
|
ConnectX®-5 Ex |
16.26.1040 |
|
ConnectX®-5 |
16.26.1040 |
|
ConnectX®-4 |
12.26.1040 |
|
ConnectX®-3 Pro |
2.42.5000 |
|
ConnectX®-3 |
2.42.5000 |
|
Connect-IB® |
10.16.1200 |
|
MFT |
4.13.0 |
The minimal required ConnectX-6 firmware version is 20.25.1532.
Switch and HCAs InfiniBand Cable Connectivity Matrix
Mellanox Quantum™ based switches and ConnectX®-6 HCAs support HDR (PAM4, 50Gb/s per lane) and EDR (NRZ, 25Gb/s per lane) technologies. As the ConnectX adapter cards are identified by their maximum supported throughput (e.g. ConnectX-6 VPI 100Gb/s card can support either 2-lanes of 50Gb/s or 4-lanes of 25Gb/s), the exact connectivity will be determined by the cable that is being used.
As a reference:
|
Speed Mode |
Speed Supported |
Number of Lanes Used |
|
HDR |
200Gb/s InfiniBand |
4 lanes of 50Gb/s |
|
HDR100 |
100Gb/s InfiniBand |
2 lanes of 50Gb/s |
|
EDR |
100Gb/s InfiniBand |
4 lanes of 25Gb/s |
The following tables present the connectivity matrix, between Mellanox Quantum based switches, ConnectX-6 HCA, and the cables.
Switch to Switch Connectivity
|
Switch |
Switch |
Cable |
|||||
|
H cable DAC |
H cable AOC |
HDR DAC |
HDR AOC |
EDR DAC |
EDR AOC |
||
|
Mellanox Quantum |
Mellanox Quantum |
No such cable |
HDR100 |
HDR |
HDR |
EDR |
EDR |
|
Switch-IB 2 |
Mellanox Quantum |
Not Supported |
Not Supported |
EDR |
Not supported |
EDR |
EDR |
Adapter to Switch Connectivity
|
Adapter |
Switch |
Cable |
|||||
|
H cable DAC |
H cable AOC |
HDR DAC |
HDR AOC |
EDR DAC |
EDR AOC |
||
|
ConnectX-6 200Gb/s |
Mellanox Quantum |
HDR100 |
HDR100 |
HDR |
HDR |
EDR |
EDR |
|
ConnectX-6 100Gb/s |
Mellanox Quantum |
HDR100 |
HDR100 |
EDR |
EDRa |
EDR |
EDR |
a. This is currently not supported. For further information see Known Issues 1796936.
Supported Link Speed
The table below lists the current supported link speed.
|
Speed |
Cable |
Cable Length |
Limitations |
|
SDR |
Optical |
Up to 100M |
|
|
Copper |
Up to 2M |
||
|
QDR |
Optical |
3/10/15/100M |
Note: QDR speed is only supported when using FDR cables. See Validated and Supported FDR Cables. |
|
FDR |
Optical |
3/10/15/100M |
Note: When using MC2207310-0xx optical cables, FDR speed is supported only with 10m/15m/30m and only on ports #7 and #9–#30. |
|
EDR |
Optical |
Up to 100M |
|
|
Copper |
Up to 3M |
||
|
HDR |
Optical |
Up to 100M |
Note: HDR optical cables support only HDR speed. Thus, when mask is configured to HDR, the link is not raised when connecting to EDR devices. |
|
Copper |
Up to 2M |
Validated and Supported FDR Cables
|
Speed |
Cable OPN # |
Description |
|
FDR |
MC2207310-003 |
Mellanox® Active Fiber Cable, VPI, up to 56Gb/s, QSFP, 3m |
|
FDR |
MC2207310-010 |
Mellanox® Active Fiber Cable, VPI, up to 56Gb/s, QSFP, 10m |
|
FDR |
MC2207310-015 |
Mellanox® Active Fiber Cable, VPI, up to 56Gb/s, QSFP, 15m |
|
FDR |
MC2207310-100 |
Mellanox® Active Fiber Cable, VPI, up to 56Gb/s, QSFP, 100m |
|
FDR |
MC220731V-005 |
Mellanox® Active Fiber Cable, VPI, up to 56Gb/s, QSFP, 5m |
Validated and Supported EDR Cables
|
Speed |
Cable OPN # |
Description |
|
EDR |
MCP1600-E001 |
Mellanox Passive Copper Cable VPI 100GB/S QSFP LSZH 1M |
|
EDR |
MCP1600-E002 |
Mellanox Passive Copper Cable VPI 100GB/S QSFP LSZH 2M |
|
EDR |
MCP1600-E00A |
Mellanox Passive Copper Cable VPI 100GB/S QSFP LSZH 0.5M |
|
EDR |
MFA1A00-E010 |
Mellanox Active Fiber Cable, VPI, up to 100Gb/s, QSFP, 10m |
|
EDR |
MFA1A00-E015 |
Mellanox Active Fiber Cable, VPI, up to 100Gb/s, QSFP, 15m |
|
EDR |
MFA1A00-E100 |
Mellanox Active Fiber Cable, VPI, up to 100Gb/s, QSFP, 100m |
|
EDR |
MCP1OPT-E002 |
Mellanox® Passive Copper cable, VPI, up to 100Gb/s, QSFP, LSZH, 2m |
|
EDR |
MMA1L10-CR |
Mellanox® optical transceiver, 100GbE, 100Gb/s, QSFP28, LC-LC, 1310nm, LR4 up to 10km |
|
EDR |
MMA1L30-CM |
Mellanox® optical module, 100GbE, 100Gb/s, QSFP28, LC-LC, 1310nm, CWDM4, up to 2km |
EDR links raise with RS_FEC.
Validated and Supported HDR Cables
|
Speed |
Cable OPN # |
Description |
|
HDR |
MCP1650-H001E30 |
Mellanox® Passive Copper cable, IB HDR, up to 200Gb/s, QSFP28, PVC, 1m, white pultab, 30AWG |
|
HDR |
MCP1650-H002E26 |
Mellanox Passive Copper Cable, IB HDR, up to 200GB/S, QSFP56, LSZH, 2M, black pultab, 26AWG |
|
HDR |
MCP1650-H00AE30 |
Mellanox Passive Copper Cable, IB HDR, up to 200GB/S, QSFP56, LSZH, 0.5M, black pultab, 30AWG |
|
HDR |
MCP7H50-H001R30 |
Mellanox® Passive Copper hybrid cable, IB HDR 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, colored pulltabs, 1m, 30AWG |
|
HDR |
MFS1S00-H003E |
Mellanox® active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 3m |
|
HDR |
MFS1S00-H005E |
Mellanox® active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 5m |
|
HDR |
MFS1S00-H010E |
Mellanox® active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 10m |
|
HDR |
MFS1S00-H100E |
Mellanox® active fiber cable, IB HDR, up to 200Gb/s, QSFP56, LSZH, black pulltab, 100m |
|
HDR |
MFS1S50-H0xxE |
Mellanox® active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, up to 30m |
|
HDR |
MFS1S90-H003E |
Mellanox® active fiber splitter cable, IB HDR, 2x200Gb/s to 2x200Gb/s, 2xQSFP56 to 2xQSFP56, LSZH, 3m |
HDR links raise with RS_FEC.
Firmware upgrade may be performed directly from any previous version to this version. To upgrade firmware, please refer to the Mellanox Firmware Tools (MFT) package at:
This firmware version complies with the Mellanox Switches Programmer’s Reference Manual (PRM), Rev 1.40 or later.