HII Main Configuration Page

Main Configuration Form

Specifies the number of seconds the LEDs on physical network port should blink to assist with port identification. Only valid for adapters with blink LEDs.

Yes – via input

Valid only for current cycle

No

0-15 sec

0

Main Configuration Form

The device's product name

No

Main Configuration Form

Specifies the chip type

No

Main Configuration Form

The PCI Device ID of the controller

No

Main Configuration Form

Specifies the BIOS assigned PCI Bus:Device:Function identifier of the card

No

Main Configuration Form

Displays current link status on port

No

Main Configuration Form

Allows user to manually choose link type on selected VPI devices

Yes – via input

Persistent through AC cycle

Yes – reboot is needed for this change to take effect.

Ethernet/InfiniBand/VPI

Main Configuration Form

Defines link working speed.

No

-

Main Configuration Form

Permanent MAC address assigned during manufacturing

No

Main Configuration Form

Displays device's virtual MAC address

No

Main Configuration Form

Indicates whether Socket Direct functionality is enabled or not.

No