Red Hat Enterprise Linux (RHEL) 9.3 Driver Documentation
Red Hat Enterprise Linux (RHEL) 9.3 Driver Documentation

Port Type Management

ConnectX®-3 onwards adapter cards’ ports can be individually configured to work as InfiniBand or Ethernet ports. By default, ConnectX® family adapter cards VPI ports are initialized as InfiniBand ports. If you wish to change the port type use the mstconfig after the driver is loaded.

  1. Install mstflint tools

    Copy
    Copied!
                

    yum install mstflint

  2. Check the device’s PCI address.

    Copy
    Copied!
                

    lspci | grep Mellanox

    Example:

    Copy
    Copied!
                

    00:06.0 Infiniband controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro]

  3. Use mstconfig to change the link type as desired—IB (InfiniBand) or ETH (Ethernet).

    Copy
    Copied!
                

    mstconfig –d <device pci> s LINK_TYPE_P1/2=<ETH|IB|VPI>

    Example:

    Copy
    Copied!
                

    # mstconfig -d 00:06.0 s LINK_TYPE_P1=ETH   Device #1: ----------   Device type: ConnectX3Pro PCI device: 00:06.0    Configurations: Current New LINK_TYPE_P1 IB(1) ETH(2)   Apply new Configuration? ? (y/n) [n] : y Applying... Done! -I- Please reboot machine to load new configurations.

  4. Reboot your machine.

© Copyright 2023, NVIDIA. Last updated on Dec 18, 2023.