NVIDIA Scalable Hierarchical Aggregation and Reduction Protocol (SHARP) Rev 3.8.0
NVIDIA Scalable Hierarchical Aggregation and Reduction Protocol (SHARP) Rev 3.8.0

Disabling SHARP on Specific Network Devices in OpenSM

Disabling SHARP on a specific network switch device can be performed using OpenSM device configuration file by performing the following:

  1. Define a port group with the specified network device in the port groups file. The group is specified by the pgrp_policy_file parameter in the OpenSM configuration file.

    For example:

    Copy
    Copied!
                

    port-group name: NON_SHARP_SWITCHES port-guid: 0x0002c90000000001 end-port-group

  2. Configure OpenSM to disable SHARP on the devices of the specified port groups in device configuration file specified by the device_configuration_file parameter in OpenSM configuration file.

    Copy
    Copied!
                

    port-conf port-group-name: NON_SHARP_SWITCHES sharp-enabled: 0 end-port-conf

  3. Reload OpenSM.

© Copyright 2024, NVIDIA. Last updated on Aug 13, 2024.