System Management
This section describes the commands that configure and monitor the network interface.
|
interface {eno8303 | eno8403 | eno12399np0 | eno12409np1 | ib0 | ib1 | ib2 | ib3} Enters a network interface context. |
||
|
Syntax Description |
eno8303 |
Management port 0 (out of band) |
|
eno8403 |
Management port 1 (out of band) |
|
|
eno12399np0 |
Management port 2 (out of band) |
|
|
eno12409np1 |
Management port 3 (out of band) |
|
|
ib0 |
InfiniBand interface 0 |
|
|
ib1 |
InfiniBand interface 1 |
|
|
ib2 |
InfiniBand interface 2 (UFM 3.0 only) |
|
|
ib3 |
InfiniBand interface 3 (UFM 3.0 only) |
|
|
Default |
N/A |
|
|
Configuration Mode |
config |
|
|
History |
1.3.0 |
|
|
Example |
|
|
|
Related Commands |
||
|
Notes |
||
|
ip address <IP address> <netmask> Sets the IP address and netmask of this interface. |
||
|
Syntax Description |
IP address |
IPv4 address |
|
netmask |
Subnet mask of IP address |
|
|
Default |
||
|
Configuration Mode |
config interface |
|
|
History |
1.3.0 |
|
|
Example |
|
|
|
Related Commands |
interface |
|
|
Notes |
The command sequence is important. The ip address command should be used first during automation since it clears both default-gateway and name-server settings |
|
|
ip default-gateway <address> Configures a default route. |
||
|
Syntax Description |
address |
gateway IPv4 address |
|
Default |
N/A |
|
|
Configuration Mode |
config |
|
|
History |
1.3.0 |
|
|
Example |
ufmapl (config)# ip default-gateway 10.209.36.1 |
|
|
Related Commands |
||
|
Notes |
The command sequence is important. The ip default-gateway command should be used during automation, after running the ip address command as it requires a static IP setting |
|
|
ip name-server <IPv4 address> Sets the static name server. |
||
|
Syntax Description |
IPv4 address |
IPv4 address. |
|
Default |
No server name |
|
|
Configuration Mode |
config |
|
|
History |
1.3.0 |
|
|
Example |
ufmapl (config)# ip name-server 9.9.9.9 |
|
|
Related Commands |
||
|
Notes |
The command sequence is important. The ip name-server command should be used during automation, after running the ip address and the ip default-gateway commands |
|
|
ipv6 address <IPv6 address>/<netmask> Configures static IPv6 address and netmask to this interface, static option is possible. |
||
|
Syntax Description |
IPv6 address/netmask |
Configures a static IPv6 address and netmask. Format example: 2001:db8:1234::5678/64. |
|
Default |
N/A |
|
|
Configuration Mode |
config interface management |
|
|
History |
1.3.0 |
|
|
Example |
|
|
|
Related Commands |
||
|
Notes |
||