NVIDIA UFM Enterprise Appliance Software User Manual v1.4.0
NVIDIA Docs Hub  NVIDIA Networking  Networking Software  Management Software  NVIDIA UFM Enterprise Appliance Software User Manual v1.4.0  System Management
NVIDIA UFM Enterprise Appliance Software User Manual v1.4.0

On This Page

System Management

Network Interfaces

This section describes the commands that configure and monitor the network interface.

interface

interface {eno8303 | eno8403 | eno12399np0 | eno12409np1 | ib0 | ib1 | ib2 | ib3}

Enters a network interface context.

Syntax Description

eno8303

Management port 0 (out of band)

eno8403

Management port 1 (out of band)

eno12399np0

Management port 2 (out of band)

eno12409np1

Management port 3 (out of band)

ib0

InfiniBand interface 0

ib1

InfiniBand interface 1

ib2

InfiniBand interface 2 (UFM 3.0 only)

ib3

InfiniBand interface 3 (UFM 3.0 only)

Default

N/A

Configuration Mode

config

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl (config) # interface eno8303
ufmapl (config interface eno8303) #

Related Commands

N/A

Notes

N/A

ip address

ip address <IP address> <netmask>

Sets the IP address and netmask of this interface.

Syntax Description

IP address

IPv4 address

netmask

Subnet mask of IP address

Default

Configuration Mode

config interface

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl (config interface eno8303) # ip address 10.10.10.10 255.255.255.0

Related Commands

interface

Notes

The command sequence is important. The ip address command should be used first during automation since it clears both default-gateway and name-server settings

ip default-gateway

ip default-gateway <address>

Configures a default route.

Syntax Description

address

gateway IPv4 address

Default

N/A

Configuration Mode

config

History

1.3.0

Example

 
ufmapl (config)# ip default-gateway 10.209.36.1

Related Commands

N/A

Notes

The command sequence is important. The ip default-gateway command should be used during automation, after running the ip address command as it requires a static IP setting

ip name-server

ip name-server <IPv4 address>

Sets the static name server.

Syntax Description

IPv4 address

IPv4 address.

Default

No server name

Configuration Mode

config

History

1.3.0

Example

 
ufmapl (config)# ip name-server 9.9.9.9

Related Commands

N/A

Notes

The command sequence is important. The ip name-server command should be used during automation, after running the ip address and the ip default-gateway commands

ipv6 address

ipv6 address <IPv6 address>/<netmask>

Configures static IPv6 address and netmask to this interface, static option is possible.

Syntax Description

IPv6 address/netmask

Configures a static IPv6 address and netmask. Format example: 2001:db8:1234::5678/64.

Default

N/A

Configuration Mode

config interface management

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl (config interface eno8303)# ipv6 address fe80::202:c9ff:fe5e:a5d8/6

Related Commands

N/A

Notes

N/A

NTP

ntp enable

ntp enable

Enables NTP.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl (config) # ntp enable

Related Commands

N/A

Notes

N/A

ntp server

ntp server <address>
Configures an NTP server node

Syntax Description

address

IPv4 address

Default

Configuration Mode

config

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl (config) # ntp server 10.10.10.10

Related Commands

N/A

Notes

N/A

ntp peer

ntp peer <address>

Configures an NTP peer

Syntax Description

address

IPv4 address

Default

Configuration Mode

config

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl (config) # ntp peer 11.11.11.11

Related Commands

N/A

Notes

N/A

Hostname

hostname

hostname <hostname>

Sets a static system hostname.

Syntax Description

hostname

String

Default

Configuration Mode

config

History

1.3.0

Example
Copy
Copied!
            

            
ufmapl(config) # hostname ufmapl-hostname

Related Commands

N/A

Notes

N/A

show hosts

show hosts

Displays hostname, DNS configuration, and static host mappings.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any configuration mode

History

1.4.0

Example
Copy
Copied!
            

            
ufmapl (config) # show hosts
 
Hostname: swx-ufm3-02
 
 
Name servers:
  10.211.0.124 (on eno8303)
  10.211.0.121 (on eno8303)
  10.7.77.135 (on eno8303)
 
Domain names:
  mtr.labs.mlnx (on eno8303)
 
Static IPv4 host mappings:
  127.0.0.1 --> localhost
 
Static IPv6 host mappings:
  ::1 --> localhost
  ::1 --> ip6-localhost
  ::1 --> ip6-loopback
  ff02::1 --> ip6-allnodes
  ff02::2 --> ip6-allrouters

Related Commands

N/A

Noes

N/A

Chassis Management

show version

show version

Displays version information for the currently running system image.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any configuration mode

History

1.4.0

Example
Copy
Copied!
            

            
ufmapl (config) # show version
UFM-OS:                 2.1.11
UFM-APPLIANCE:          1.4.0-3
UFM-ENTERPRISE:         6.13.0-3
UFM-CHASSIS-HEALTH:     1.0.0-3
UFM-HA:                 5.1.0-8
UFM-CLI:                1.1.0-2
 
Uptime:                 2d 18h 00m
CPU load averages:      0.00 / 0.05 / 0.07
Number of CPUs:         64
System memory:          2832 MB used / 57132 MB free / 65400 MB total
Swap:                   0 MB used / 16252 MB free / 16252 MB total  

Related Commands

Notes

© Copyright 2023, NVIDIA. Last updated on Sep 5, 2023.