Known Issue History

NVIDIA UFM Enterprise Appliance Software User Manual v1.4.2

Ref #



Description: Upgrading UFM Enterprise Appliance from versions 1.3.0, 1.2.0 and 1.1.0 results in cleanup of UFM historical telemetry database (due to schema change). This means that the new telemetry data will be stored based on the new schema.

Workaround: To preserve the historical telemetry database data while upgrading from UFM Enterprise Appliance version 1.3.0, 1.2.0 and 1.1.0, perform the upgrade in two phases. First, upgrade to UFM Enterprise Appliance v1.2.0, and then upgrade to the latest UFM version (UFM v1.3.0 or newer). It is important to note that the upgrade process may take longer depending on the size of the historical telemetry database.

Keywords: UFM Historical Telemetry Database, Cleanup, Upgrade


Description: In some cases, when multiport SM is configured in UFM, a failover to the secondary node might be triggered instead of failover to the local available port

Workaround: N/A

Keywords: Multiport SM, Failover, Secondary port


Description: Enabling a port for a managed switch fails in case that port is not disabled in a persistent way (this may occur in ports that were disabled in previous versions of UFM Enterprise Appliance v1.3.0)

Workaround: Set "persistent_port_operation=false” in gv.cfg to use non-persistent (legacy) disabling or enabling of the port. UFM restart is required.

Keywords: Disable, Enable, Port, Persistent


Description:  Failover to another port (multi-port SM) will not work as expected in case UFM was deployed as a docker container

Workaround: Failover to another port (multi-port SM) works properly on UFM Bare-metal deployments

Keywords: Failover to another port, Multi-port SM


Description: Replacement of defected nodes in the HA cluster does not work when PCS version is 0.9.x

Workaround: N/A

Keywords: Defected Node, HA Cluster, pcs version


Description: UFM-HA: If the back-to-back interface is disabled or disconnected, the HA cluster will enter a split-brain state, and the "ufm_ha_cluster status" command will stop functioning properly.

Workaround: To resolve the issue:

  1. Connect or enable the back-to-back interface

  2. Run


    pcs cluster start --all

  3. Follow instructions in Split-Brain Recovery in HA Installation.

Keywords: HA, Back-to-back Interface


Description: Running UFM software with external UFM-SM is no longer supported

Workaround: N/A

Keywords: External UFM-SM

© Copyright 2023, NVIDIA. Last updated on Sep 5, 2023.