NVIDIA UFM Enterprise Appliance Software User Manual v1.7.0
NVIDIA UFM Enterprise Appliance Software User Manual v1.7.0

UFM Commands

ufm start

ufm start

no ufm start

Starts UFM.

The no form of the command stops UFM.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.4.1

Example

Copy
Copied!
            

ufmapl (config) # ufm start

Related Commands

show ufm status

Notes


show ufm status

show ufm status

Displays the status of UFM. The outcome of the command varies according to the working mode.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.4.2

Updated command output

1.4.0

First release

Example

Copy
Copied!
            

ufmapl (config) # show ufm status   Cluster name: ufmcluster WARNING: corosync and pacemaker node names do not match (IPs used in setup?) Stack: corosync Current DC: swx-ufm3-02 (version 1.1.18-2b07d5c5a9) - partition with quorum Last updated: Thu Jun 1 19:06:57 2023 Last change: Thu Jun 1 19:06:11 2023 by root via crm_resource on swx-ufm3-02   2 nodes configured 5 resources configured   Online: [ swx-ufm3-01 swx-ufm3-02 ] Full list of resources:   Master/Slave Set: ha_data_drbd_master [ha_data_drbd] Masters: [ swx-ufm3-01 ] Slaves: [ swx-ufm3-02 ] Resource Group: ufmcluster-grp ha_data_file_system (ocf::heartbeat:Filesystem): Started swx-ufm3-01 ufm-ha-watcher (systemd:ufm-ha-watcher): Started swx-ufm3-01 ufm-enterprise (systemd:ufm-enterprise): Started swx-ufm3-01   Daemon Status: corosync: active/enabled pacemaker: active/enabled pcsd: active/enabled DRBD_RESOURCE: ha_data DRBD_CONNECTIVITY: Connected DISK_STATE: UpToDate DRBD_ROLE: Primary PEER_DISK_STATE: UpToDate PEER_DRBD_ROLE: Secondary DRBD Sync Status: version: 8.4.10 (api:1/proto:86-101) srcversion: 7C5B8378BE913D722F67EFD 0: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C r----- ns:9044 nr:159762612 dw:159771656 dr:2813 al:48 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:0   =========================================================================================== UFM Main Processes =========================================================================================== ModelMain Process is : [ Running ] Opensm Process is : [ Running ] Unhealthy Ports Process is : [ Running ] Daily Report Process is : [ Running ] UFM Health Process is : [ Running ] UFM Telemetry Process is : [ Running ] UFM Running ======================================= HA Summary ======================================= Local ======================================= Primary IP 11.0.0.11 Secondary IP 10.209.44.115 DRBD Running Primary DRBD State ConnectionState = Connected - DiskState = UpToDate ======================================= Peer ======================================= Primary IP 11.0.0.12 Secondary IP 10.209.44.116 DRBD Running Secondary DRBD State ConnectionState = Connected - DiskState = UpToDate ======================================= swx-ufm3-01 (config) #

Related Commands

N/A

Notes

  • The output example above is taken from a high-availability setup

  • If working in HA mode, you will receive information on the HA status

The process status can be one of the below:

  • Running – the process is running

  • Stopped – the process is not running


ufm license install

ufm license install <url>

Installs a UFM license file from a remote host.

Syntax Description

url

https, scp and sftp are supported. Example: scp://username[:password]@hostname/path/filename, usb:/path/filename.

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm license install scp://root:123456@10.209.1.21/tmp/volt-ufm-advanced.lic

Related Commands

ufm license delete

show ufm license

Notes

  • The license format must be as follow: volt-ufm-*.lic, mlnx-ufm-*.lic or nvidia-ufm-*.lic

  • Duplicate license are not permitted. You must delete the previous license before installing the new one.


ufm license delete

ufm license delete <filename>

Deletes a UFM license file from the hard drive.

Syntax Description

filename

UFM license filename

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm license delete volt-ufm-advanced.lic

Related Commands

ufm license install

show ufm license

Notes


show ufm license

show ufm license

Displays UFM license information.

Syntax Description

N/A

Default

N/A

Configuration Mode

Enable

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # show ufm license |------------------------------------------------------------------------------------------| |Customer ID |SN | swName | Type | MAC Address | Exp. Date   |Limit| Functionality | Status | |------------------------------------------------------------------------------------------| |495760397 |123456778   |UFM |Evaluation     |NA |2090-11-21     |1024 |Advanced |Valid   | |------------------------------------------------------------------------------------------|

Related Commands

ufm license install

ufm license delete

Notes


show files ufm-license

show files ufm-license

Displays a list of UFM license files

Syntax Description

N/A

Default

N/A

Configuration Mode

Enable

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # show files ufm-license nvidia-ufm-advanced.lic

Related Commands

ufm license delete

Notes


ufm configuration delete

ufm configuration delete <zip-file>

Deletes a configuration zip file from the hard drive.

Syntax Description

zip-file

Zip filename to delete

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm configuration delete ufm-config-20121128-180857.zip

Related Commands

ufm configuration upload

ufm configuration import

ufm configuration export

ufm configuration fetch

Notes


ufm configuration export

ufm configuration export [<zip-file>]

Exports UFM configuration to a file (a zip archive).

Syntax Description

zip-file

UFM configuration of exporting the zip file

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm configuration export

Related Commands

ufm configuration upload

ufm configuration import

ufm configuration delete

ufm configuration fetch

Notes

If no zip file is provided, a zip archive is created with the name: ufm-config-<date>-<time>.zip (e.g. ufm-config-20130327-153314.zip)


ufm configuration fetch

ufm configuration fetch <url>

Downloads UFM configuration files from a remote host or a USB device.

Syntax Description

url

The URL path from where the configuration file can be downloaded.

https, scp and sftp are supported. Example: scp://username[:password]@hostname/path/filename

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm configuration fetch usb:/ufmapp/ufmconf1.zip

Related Commands

ufm configuration upload

ufm configuration import

ufm configuration export

ufm configuration delete

Notes


ufm configuration import

ufm configuration import <zip-file> [upgrade]

Imports UFM configuration from a file (a zip archive).

Syntax Description

zip-file

Zip filename from which to import

upgrade

Imports UFM-SDN Appliance configuration from a previous version and upgrades it to the latest one

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm configuration import ufm-config-20121128-180857.zip

Related Commands

ufm configuration upload

ufm configuration export

ufm configuration delete

ufm configuration fetch

Notes


ufm configuration upload

ufm configuration upload <filename> <url>

Uploads UFM configuration to a remote host or a USB device (a zip archive).

Syntax Description

filename

The UFM configuration of uploading the file name

url

The URL path from where the configuration file can be uploaded. Supported formats: https, scp and sftp. Example: scp://username[:password]@hostname/path/filename

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # ufm configuration upload ufm-config-20121128-180857.zip scp://mlnx:123456@172.30.3.201/tmp

Related Commands

ufm configuration export

ufm configuration import

ufm configuration delete

Notes


show files ufm-configuration

show files ufm-configuration

Displays a list of UFM configuration zip archives.

Syntax Description

N/A

Default

N/A

Configuration Mode

Enable

History

1.6.0

Example

Copy
Copied!
            

ufmapl (config) # show files ufm-configuration ufm-config-20231105-102019.zip

Related Commands

Notes


ufm data reset

ufm data reset

Resets the UFM data (both the configuration and the database data).

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.5.0

Example

Copy
Copied!
            

ufmapl (config) # ufm data reset This command resets UFM data (configuration and database) and consequently deletes installed web client related certificates. Are you sure you wish to proceed? [yes/no] yes   UFM reset to factory defaults finished successfully.

Related Commands

N/A

Notes

This command is available in standalone mode only. For resetting UFM in HA mode, refer to no ufm ha.


ufm mgmt-interface monitor enable

ufm mgmt-interface monitor enable

no ufm mgmt-interface monitor enable

Enables monitoring of the management interface.

The no form of the command disables monitoring of the management interface.

Syntax Description

N/A

Default

Disabled

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm mgmt-interface monitor enable

Related Commands

ufm mgmt-interface monitor interval

ufm mgmt-interface

show ufm mgmt-interface

Notes


ufm mgmt-interface monitor interval

ufm mgmt-interface monitor interval <time>

Configures the management interface monitoring interval.

Syntax Description

time

The management interface monitoring interval. Range: 5-180 seconds.

Default

10 seconds

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm mgmt-interface monitor interval 15

Related Commands

ufm mgmt-interface monitor enable

ufm mgmt-interface

show ufm mgmt-interface

Notes


ufm mgmt-interface

ufm mgmt-interface <interface>

Configures the management interface to be monitored.

Syntax Description

interface

Management interface to be monitored (e.g. eno8303, eno8403)

Default

eno8303

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm mgmt-interface eth0

Related Commands

ufm mgmt-interface monitor enable

ufm mgmt-interface monitor interval

show ufm mgmt-interface

Notes

N/A


show ufm mgmt-interface

show ufm mgmt-interface

Displays the management interface settings.

Syntax Description

N/A

Default

N/A

Configuration Mode

Enable

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # show ufm mgmt-interface   Management interface monitoring: Interface name:      eno8303  Enabled: Yes Monitoring interval: 10 seconds

Related Commands

ufm mgmt-interface monitor enable

ufm mgmt-interface monitor interval

ufm mgmt-interface

Notes


show ufm logging

show ufm logging

Displays logging configuration.

Syntax Description

N/A

Default

N/A

Configuration Mode

Enable

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # show ufm logging Number of archived log files to keep: 15 Log rotation size threshold: 100M   Ufm-log level: WARNING Syslog: Enabled: No Server: Local Level: WARNING Ufm-log enabled: No Ufm-events enabled: No swx-ufm3-01 (config) #

Related Commands

Notes


ufm logging syslog enable

ufm logging syslog enable

no ufm logging syslog enable

Enable sending UFM logs to syslog.

The no form of the command disables sending UFM logs to syslog.

Syntax Description

N/A

Default

Disabled

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm logging syslog enable

Related Commands

Notes

This change takes effect after UFM restart.


ufm logging syslog

ufm logging syslog <host:port>

no ufm logging syslog

Sends UFM logs to a remote syslog server.

The no form of the command sends UFM logs to the local syslog server.

Syntax Description

port

Remote syslog hostname and port

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm logging syslog 172.30.36.120:514

Related Commands

Notes

This change takes effect after UFM restart.


ufm logging syslog ufm-log enable

ufm logging syslog ufm-log enable

no ufm logging syslog ufm-log enable

Send UFM log messages to a syslog server

The no form of the command disables sending UFM log messages to a syslog server

Syntax Description

N/A

Default

Disabled

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm logging syslog enable

Related Commands

Notes

This change takes effect after UFM restart.


ufm logging syslog ufm-events enable

ufm logging syslog ufm-events enable

no ufm logging syslog ufm-events enable

Send UFM event log messages to a syslog server.

The no form disables the ability to log UFM event messages to syslog server

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm logging syslog ufm-events enable

Related Commands

Notes

This change takes effect after UFM restart.


ufm logging level

ufm logging level <log-level>

Sets the severity level of certain log messages.

Syntax Description

log-level

  • CRITICAL – critical conditions

  • DEBUG – debug-level messages

  • ERROR – error conditions

  • INFO – informational messages

  • WARNING – warning conditions

Default

WARNING

Configuration Mode

config

History

1.6

Example

Copy
Copied!
            

ufmapl  (config) # ufm logging level WARNING

Related Commands

Notes


ufm web-client mode

ufm web-client mode <http | https-client-authentication>

Configures Access mode to the UFM web clients.

Syntax Description

https

HTTPS access

https-client-authentication

HTTPS access with client authentication

Default

https

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm web-client mode https-client-authen

Related Commands

show ufm web-client

ufm web-client client-authentication

ufm web-client associate-user

Notes


ufm web-client associate-user

ufm web-client associate-user <san> <username>

no ufm web-client associate-user <san> <username>

Associates client certificate subject alternative name with a UFM user.

The no form of the command disassociates client certificate subject alternative name from a UFM user.

Syntax Description

san

Client certificate subject alternative name

username

UFM username

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm web-client associate-user ufm.mellanoxhpc.net admin

Related Commands

show ufm web-client

ufm web-client mode

ufm web-client client-authentication

Notes


show ufm web-client

show ufm web-client

Displays UFM web client settings.

Syntax Description

N/A

Default

N/A

Configuration Mode

enable

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # show ufm web-client Mode: HTTPS Client authentication: Yes   Bootstrap certificate file: Present CA certificate file: Present Server certificate file: Present   Server certificate hostname: ufm.mellanoxhpc.net   User Associations: SAN: ufm.mellanoxhpc.net User: ufmsysadmin   Certificate Auto-refresh: Enabled: Yes CA certificate URL: https://mellanox.com/cacert Server certificate URL: https://mellanox.com/servercerts Server certificate thumbprint: 2268BDD79DF7FD9C818EB97F315AE0F35D223A15 Last checked: 2019-04-20 20:57:21 Last update: 2019-04-20 20:57:21

Related Commands

ufm web-client mode

ufm web-client client-authentication

ufm web-client associate-user

Notes


ufm web-client client-authentication cert-refresh enable

ufm web-client client-authentication cert-refresh enable

no ufm web-client client-authentication cert-refresh enable

Enables UFM web client certificates auto-refresh.

The no form of the command disables the feature.

Syntax Description

N/A

Default

Disabled

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm web-client client-authentication cert-refresh enable

Related Commands

show ufm web-client

Notes


ufm web-client client-authentication cert-refresh ca-cert

ufm web-client client-authentication cert-refresh ca-cert <download-url>

no ufm web-client client-authentication cert-refresh ca-cert <download-url>

Sets the download URL for root/intermediate certificate.

The no form of the command clears the root/intermediate certificate auto-refresh settings.

Syntax Description

download-url

Download URL for root/intermediate certificate

Default

N/A

Configuration Mode

config

History

1.5

Example

Copy
Copied!
            

ufmapl (config) # ufm web-client client-authentication cert-refresh ca-cert "https://mellanox.com/cacerts"

Related Commands

show ufm web-client

Notes


ufm web-client client-authentication cert-refresh server-cert

ufm web-client client-authentication cert-refresh server-cert <url> <thumbprint>

no ufm web-client client-authentication cert-refresh server-cert <url> <thumbprint>

Sets the download URL for server and bootstrap certificates.

The no form of the command clears the server and bootstrap certificates auto-refresh settings.

Syntax Description

url

https and sftp are supported. Example: sftp://username[:password]@hostname/path/filename.

thumbprint

Server certificate thumbprint

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm web-client client-authentication cert-refresh server-cert "https://mellanox.com/servercerts" 2268BDD79DF7FD9C818EB97F315AE0F35D223A15

Related Commands

show ufm web-client

Notes


ufm web-client client-authentication cert-refresh run-now

ufm web-client client-authentication cert-refresh run-now

Refreshes the server and root/intermediate certificates manually.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm web-client client-authentication cert-refresh run-now

Related Commands

show ufm web-client

Notes


ufm track-conf-changes enable

ufm track-conf-changes enable

no ufm track-conf-changes enable

Enables UFM configuration changes tracking

The no form of the command disables UFM configuration changes tracking

Syntax Description

N/A

Default

Enabled

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # ufm track-conf-changes enable

Related Commands

show ufm track-conf-changes

Notes


show ufm track-conf-changes

show ufm track-conf-changes

Displays UFM configuration changes tracking settings

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

ufmapl (config) # show ufm Track UFM configuration changes: No

Related Commands

ufm track-conf-changes enable

no ufm track-conf-changes enable

Notes


ufm ha

ufm ha [failover | takeover]

Performs High Availability failover/takeover operations.

Syntax Description

failover

Failover can be performed only on master (active) machine

takeover

Takeover can be performed only on slave (standby) machine

Default

N/A

Configuration Mode

config

History

1.4.1

Example

Copy
Copied!
            

ufmapl (config) # ufm ha takeover

Related Commands

Notes


ufm ha configure

ufm ha configure <standby|master> <local primary IP> <peer primary IP> <local secondary IP> <peer secondary IP> <virtual ip> <hacluster-pwd>

no ufm ha

Applies HA configuration.

The no form of the command reverts the appliance to a standalone configuration.

Syntax Description

node-role

Master or standby

local-primary-ip

Local node primary IP address

peer-primary-ip

Peer node primary IP address

local-secondary-ip

Local node secondary IP address

peer-secondary-ip

Peer node secondary IP address

virtual ip

Virtual IP used for accessing the active (master) machine

hacluster-pwd

hacluster user password

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

swx-ufm3-01 (config) # ufm ha configure standby 11.0.0.12 11.0.0.11 10.209.44.12 10.209.44.11 10.209.44.111 123456

Related Commands

Notes

  1. The local and peer primary interfaces should be connected directly back-to-back

  2. The command must be ran first on standby node and only then on the master node


ufm ha configure dual-subnet

ufm ha configure dual-subnet <standby|master> <local primary IP> <peer primary IP> <local secondary IP> <peer secondary IP> <hacluster-pwd>

no ufm ha

Applies HA configuration for dual-subnet.

The no form of the command reverts the appliance to a standalone configuration.

Syntax Description

node-role

Master or standby

local-primary-ip

Local node primary IP address

peer-primary-ip

Peer node primary IP address

local-secondary-ip

Local node secondary IP address

peer-secondary-ip

Peer node secondary IP address

hacluster-pwd

hacluster user password

Default

N/A

Configuration Mode

config

History

1.4.0

Example

Copy
Copied!
            

swx-ufm3-01 (config) # ufm ha configure dual-subnet standby 11.0.0.12 11.0.0.11 10.209.44.12 10.209.44.11 123456

Related Commands

Notes

  1. The local and peer primary interfaces should be connected directly back-to-back

  2. The command must be ran first on standby node and only then on the master node


ufm ha-nodes

ufm ha-nodes <master hostname> <standby hostname>

no ufm ha-nodes

Sets the HA nodes information in UFM configuration.

The no form of the commands clears the HA nodes information from the UFM configuration.

Syntax Description

master hostname

The originally set master node hostname.

standby hostname

The originally set standby node hostname.

Default

N/A

Configuration Mode

config

History

1.5.0

Example

Copy
Copied!
            

ufmapl (config) # ufm ha-nodes ufm-host-01 ufm-host-02

Related Commands

show ufm ha-nodes

Notes


show ufm ha-nodes

show ufm ha-nodes

Shows the UFM HA configuration that is set in UFM.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.5.0

Example

Copy
Copied!
            

ufmapl (config) # show ufm ha-nodes 08c0eb030098609a:11.0.0.12:1,08c0eb0300986042:11.0.0.11:2

Related Commands

ufm ha-nodes

Notes

N/A


ufm multi-port-sm

ufm multi-port-sm enable

ufm multi-port-sm ha-enable

no ufm multi-port-sm enable

Enables configuring OpenSM with multiple GUIDs.

The no form of the command disables configuring OpenSM with multiple GUIDs.

Syntax Description

enable – enables configuring OpenSM with multiple GUIDs

ha-enable – enables multi-port SM with high availability

Default

Disabled

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufm (config) # ufm multi-port-sm enable

Related Commands

show ufm multi-port-sm

Notes


show ufm multi-port-sm

show ufm multi-port-sm

Displays whether configuring OpenSM with multiple GUIDs is enabled.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufm (config) # show ufm multi-port-sm Enable

Related Commands

ufm multi-port-sm enable

Notes


ufm additional-fabric-interfaces

ufm additional-fabric-interfaces

no ufm additional-fabric-interfaces

Sets additional fabric interfaces for OpenSM.

Clears the additional fabric interfaces list.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufm (config) #ufmapl (config) # ufm additional-fabric-interfaces ib1

Related Commands

ufm multi-port-sm enable

Notes


show ufm additional-fabric-interfaces

show ufm additional-fabric-interfaces

Displays the additional fabric interfaces list used by OpenSM.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.6.0

Example

Copy
Copied!
            

ufm (config) # show ufm additional-fabric-interfaces ib1

Related Commands

ufm multi-port-sm enable

Notes


ufm plugin

ufm plugin <plugin-name> {add [tag <plugin tag>] | enable | remove}

no ufm plugin <plugin-name> enable

Manages the UFM plugin.

The no form of the command disables the UFM plugin.

Syntax Description

add [tag <plugin tag>]

Adds UFM plugin with an optional plugin tag

enable

Enables UFM plugin

remove

Removes UFM plugin

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufm (config) # ufm plugin ndt add tag 1.1.1-17

Related Commands

show ufm plugin

Notes

  • The plugin can be added, removed, enabled or disabled while UFM is running.

  • The plugin will be started upon UFM startup.

  • Disabling the plugin will only stop it.

  • Removing the plugin also clears all its folders and files (including conflagration and logs).

show ufm plugin

show ufm plugin

Displays UFM plugin information

Syntax Description

N/A

Default

enabled

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufm (config) # show ufm plugin Plugin ndt: Enabled: Yes Plugin tag: 1.1.1-17 Shared volumes: /opt/ufm/files/log:/log,/dev:/host_dev HTTPD port: 8980 HTTPD file: Present State: running CPU limit: unlimited

Related Commands

ufm plugin add, ufm plugin remove, ufm plugin enable, no ufm plugin enable

Notes

ufm process health start

ufm process health start

ufm process health restart

no ufm process health start

Starts/restarts the UFM health process.

The no form of the command stops the UFM health process.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufmapl (config) # ufm process health start

Related Commands

show ufm status

Notes


ufm process model start

ufm process model start

ufm process model restart

no ufm process model start

Starts/restarts the UFM ModelMain process.

The no form of the command stops the UFM ModelMain process.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufmapl (config) # ufm process model start

Related Commands

show ufm status

Notes

When stopping the UFM ModelMain process, the UFM health is also stopped in order not to start the UFM ModelMain process.


ufm process telemetry start

ufm process telemetry start

ufm process telemetry restart

no ufm process telemetry start

Starts/restarts UFM telemetry process.

The no form of the command stops UFM telemetry process.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufmapl (config) # ufm process telemetry start

Related Commands

show ufm status

Notes

When stopping the UFM telemetry process, the UFM health is also stopped in order not to start the UFM telemetry process.


ufm process sharp start

ufm process sharp start

ufm process sharp restart

no ufm process sharp start

Starts/restarts the NVIDIA SHARP Aggregation Manager process.

The no form of the command stops the NVIDIA SHARP Aggregation Manager process.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufmapl (config) # ufm process sharp start

Related Commands

show ufm status

Notes

When stopping the SHARP Aggregation Manager process, the UFM health is also stopped in order not to start

the SHARP Aggregation Manager process.


ufm process telemetry start

ufm process telemetry start

ufm process telemetry restart

no ufm process telemetry start

Starts/restarts the UFM Telemetry process.

The no form of the command stops the UFM Telemetry process.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufmapl (config) # ufm process telemetry start

Related Commands

show ufm status

Notes

When stopping the UFM Telemetry process, the UFM health is also stopped in order not to start

the UFM Telemetry process.


ufm process sm start

ufm process sm start

ufm process sm restart

no ufm process sm start

Starts/restarts the SM.

The no form of the command stops the SM.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

1.7.0

Example

Copy
Copied!
            

ufmapl (config) # ufm process sm start

Related Commands

show ufm status

Notes

When stopping the SM process, the UFM health is also stopped in order not to start

the SM process.


© Copyright 2023, NVIDIA. Last updated on Mar 7, 2024.