Replacing the Standby Node

Install the HA package for the new node (standby).
Disconnect the standby node (the old standby) and run the following command on the master node:
Copy

Copied!
```
            
            ufm_ha_cluster detach
        
```
Configure the new standby node; please refer to the relevant section depending on the installation

Connect the new standby to the cluster by running the command on the master node:

Copy
Copied!

            
            ufm_ha_cluster attach -l <local primary ip address> -e <peer primary ip address> -E <peer secondary ip address> -p <clust