NVIDIA UFM Enterprise User Manual v6.13.0
NVIDIA UFM Enterprise User Manual v6.13.0

Split-Brain Recovery in HA Installation

The split-brain problem is a DRBD synchronization issue (HA status shows DUnknown in the DRBD disk state), which occurs when both HA nodes are rebooted. For example, in cases of electricity shut-down. To recover, please follow the below steps:

  • Step 1: Manually choose a node where data modifications will be discarded.
    It is called the split-brain victim. Choose wisely; all modifications will be lost! When in doubt, run a backup of the victim’s data before you continue.
    When running a Pacemaker cluster, you can enable maintenance mode. If the split-brain victim is in the Primary role, bring down all applications using this resource. Now switch the victim to the Secondary role:

    Copy
    Copied!
                

    victim# drbdadm secondary ha_data 

  • Step 2: Disconnect the resource if it’s in connection state WFConnection:

    Copy
    Copied!
                

    victim# drbdadm disconnect ha_data 

  • Step 3: Force discard of all modifications on the split-brain victim:

    Copy
    Copied!
                

    victim# drbdadm -- --discard-my-data connect ha_data 

    For DRBD 8.4.x:

    Copy
    Copied!
                

    victim# drbdadm connect --discard-my-data ha_data 

  • Step 4: Resync starts automatically if the survivor is in a WFConnection network state. If the split-brain survivor is still in a Standalone connection state, reconnect it:

    Copy
    Copied!
                

    survivor# drbdadm connect ha_data 

    Now the resynchronization from the survivor (SyncSource) to the victim (SyncTarget) starts immediately. There is no full sync initiated, but all modifications on the victim will be overwritten by the survivor’s data, and modifications on the survivor will be applied to the victim.

© Copyright 2023, NVIDIA. Last updated on Sep 5, 2023.