High Availability

ufm ha configure

	ufm ha [ipv6] configure <peer-ip> <virtual-ip> [interface] no ufm ha Applies HA configuration. The no form of the command reverts the appliance to a standalone configuration.
Syntax Description	peer-ip	Management IP address of peer machine
	virtual-ip	Virtual IP used for accessing the active (master) machine
	interface	Sets the working interface. The interface can be eth0...eth3, if no interface is assigned, eth0 is assumed to be the chosen interface.
Default	N/A
Configuration Mode	config
History	1.5
History	1.6	Added the "interface" parameter
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # ufm ha configure 172.30.30.24 172.30.30.100 Please enter admin password for peer machine: ***** Configuring high availability, please wait... High availability is now configured. Please wait a few minutes for UFM machines to synchronize the configuration partition (DRBD). Please make sure all local UFM users on both machines have the same capabilities and passwords.`
Related Commands
Notes

	ufm ha [ipv6] configure dual-subnet <local-ip> <peer-ip> <interface> no ufm ha dual-subnet Applies HA configuration for dual-subnet. The no form of the command reverts the appliance to a standalone configuration.
Syntax Description	local-ip	Management IP address of the local machine
	peer-ip	Management IP address of peer machine
	interface	Sets the working interface. The interface can be eth0...eth3, if no interface is assigned, eth0 is assumed to be the chosen interface.
Default	N/A
Configuration Mode	config
History	4.1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # ufm ha ipv6 configure dual-subnet fcfc:fcfc:209:36:21e:67ff:fe49:ce2a fcfc:fcfc:209:32:21e:67ff:fe4f:483a eth1`
Related Commands
Notes

	ufm ha [failover \| takeover] Performs High Availability failover/takeover operations.
Syntax Description	failover	Failover can be performed only on master (active) machine
Syntax Description	takeover	Takeover can be performed only on slave (standby) machine
Default	N/A
Configuration Mode	config
History	1.5
Example	Copy Copied! `ufmapl [ mgmt-sa ] (config) # ufm ha takeover`
Related Commands
Notes