NVIDIA UFM-SDN Appliance Command Reference Guide v4.14.0
v4.14.0

On This Page

Network Bonding

bond <bonded-if> [mode <string>] [link-mon-time <milliseconds>] [up-delay-time <milliseconds>] [down-delay-time <milliseconds>]

no bond <bonded-if>

Creates the named bonded interface.

The no form of the command deletes the named bonded interface.

Syntax Description

mode

Specifies the type of mode the bonded interface is:

  • balance-rr

  • backup

  • balance-xor

  • balance-xor-layer3+4

  • broadcast

  • link-agg

  • link-agg-layer3+4

  • balance-tlb

  • balance-alb

link-mon-time

Specifies the link monitoring frequency (in msecs)

up-delay-time

Specifies the time (in msecs) to wait before enabling a slave after a link recovery has been detected

down-delay-time

Specifies the time (in msecs), to wait before disabling a slave after a link failure has been detected for the specified bonded interface

Default

N/A

Configuration Mode

config

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # bond bond0 mode backup ufmapl [ mgmt-sa ] (config) # bond bond0 link-mon-time 100

Related Commands

interface

show bonds

Notes

interface <ifname> bond <bond-if>

no interface <ifname> bond <bond-if>

Adds the named interface from the specified bonded interface.

The no form of the command removes the named interface from the specified bonded interface.

Syntax Description

bond

The bonded interface

Default

N/A

Configuration Mode

config

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # interface ib0 bond bond0

Related Commands

bond

show bonds

Notes

show bonds [bonded-if]

Displays bonding configuration and status.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any configuration mode

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # show bonds Bonded Interface bond0: Enabled: yes Mode: backup Link Monitor Time: 100 Interfaces: ib0 ib1

Related Commands

bond

interface

Notes

© Copyright 2023, NVIDIA. Last updated on Nov 7, 2023.