HCA Commands
ib hca-smp-window <value> no ib hca-smp-window Sets the maximum number of SMPs sent in HCA. The no form of the command resets this parameter to its default. | ||
Syntax Description | value | Range: 0-256 |
Default | 128 | |
Configuration Mode | config | |
History | 4.4.0 | |
Example |
| |
Related Commands | show ib hca-smp-window | |
Notes | UFM system must be rebooted to apply the new configuration |
ib hca-vl15-window <value> no ib hca-vl15-window Sets the HCA VL15 port receive buffer size. The no form of the command resets this parameter to its default. | ||
Syntax Description | value | 1,2,4,8,16,32,64,128 |
Default | 1 | |
Configuration Mode | config | |
History | 4.4.0 | |
Example |
| |
Related Commands | show ib hca-vl15-window | |
Notes | UFM system must be rebooted to apply the new configuration |
ufm hca-grouping enable no ufm hca-grouping enable Enables HCA grouping. The no form of the command disables HCA grouping. | ||
Syntax Description | N/A | |
Default | Disabled | |
Configuration Mode | config | |
History | 4.5.0 | |
Example |
| |
Related Commands | show ufm hca-grouping | |
Notes | To use this capability, it is recommended for users to use this command after performing software upgrade. |
show ib hca-smp-window Displays the configured maximum number of SMPs sent in HCA. | ||
Syntax Description | N/A | |
Default | N/A | |
Configuration Mode | Any configuration mode | |
History | 4.4.0 | |
Example |
| |
Related Commands | ib hca-smp-window | |
Notes | The example shows an instance where the system has not been rebooted after implementing new configuration |
show ib hca-vl15-window Displays the configured HCA VL15 port receive buffer size. | ||
Syntax Description | N/A | |
Default | N/A | |
Configuration Mode | Any configuration mode | |
History | 4.4.0 | |
Example |
| |
Related Commands | ib hca-vl15-window | |
Notes | The example shows an instance where the system has not been rebooted after implementing new configuration |
show ufm hca-grouping Displays UFM HCA grouping configuration. | ||
Syntax Description | N/A | |
Default | N/A | |
Configuration Mode | Any configuration mode | |
History | 4.5.0 | |
Example |
| |
Related Commands | ufm hca-grouping enable | |
Notes |