Security

NVIDIA UFM-SDN Appliance Command Reference Guide v4.9.0

ip filter enable
no ip filter enable

Enables IP filtering.
The no form of the command disables IP filtering.

Syntax Description

N/A

Default

Disabled

Configuration Mode

config

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # no ip filter enable

Related Commands

show ip filter

Notes

ip filter chain [FORWARD <clear> <policy> <rule> | INPUT <clear> <policy> <rule> | OUTPUT <clear> <policy> <rule>]
no ip filter chain

Sets the policy, as a default target, for a specified chain.
The no form of the command resets the policy to its default.

Syntax Description

clear

Delete all rules from this chain

policy

Specify default policy for this chain

rule

Add or modify an IP filtering rule

Default

N/A

Configuration Mode

config

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # ip filter chain FORWARD clear

Related Commands

show ip filter

Notes

show ip filter [all | configured]

Displays IP filtering configuration or status.

Syntax Description

all

Displays IP filtering state (including unconfigured rules)

configured

Displays IP filtering configuration

Default

N/A

Configuration Mode

Any configuration mode

History

1.5

Example

Copy
Copied!
            

ufmapl [ mgmt-sa ] (config) # show ip filter Packet filtering for IPv4: DISABLED Active IPv4 filtering rules (omitting any not from configuration):   Chain 'INPUT' No rules. Policy: ACCEPT   Chain 'OUTPUT' No rules. Policy: ACCEPT   Chain 'FORWARD' No rules. Policy: ACCEPT

Related Commands

ip filter chain
ip filter enable

Notes

© Copyright 2023, NVIDIA. Last updated on Sep 6, 2023.