Modifying UFM Configuration Files

To modify UFM configuration files:

Export the configuration to a "zip" file.

Copy
Copied!

            
            ufm-appliance > enable
ufm-appliance # configure terminal
ufm-appliance [ mgmt-sa ] (config) # ufm configuration export

Upload the file to a USB storage device or to a remote server.

Copy
Copied!

            
            ufm-appliance [ mgmt-sa ] (config) # ufm configuration upload ufm-config-20121128-180857.zip scp://mlnx:123456@172.30.3.201/tmp

Extract the "zip" file ("conf" folder).
Perform any required modification to the files placed in the "conf" folder.
Pack the "conf" folder back into the "zip" file.

Fetch the file to the appliance.

Copy
Copied!

            
            ufm-appliance [ mgmt-sa ] (config) # ufm configuration fetch scp://mlnx:123456@172.30.3.201/tmp/ufm-config-20121128-180857-modified.zip

[Optional] Stop UFM server.
Some parameters can be modified and have effect without restarting UFM®-SDN SM.
Copy

Copied!
```
            
            ufm-appliance [ mgmt-sa ] (config) # no ufm start
        
```

Import the configuration from the "zip" file.

Copy
Copied!

            
            ufm-appliance [ mgmt-sa ] (config) # ufm configuration import ufm-config-20121128-180857-modified.zip

Due to the configuration import, a signal is sent to the SM.

[Optional, only if Step 5 is performed] Start UFM server.

Copy
Copied!

            
            ufm-appliance [ mgmt-sa ] (config) # ufm start
Starting UFM, please wait...
ufm-appliance [ mgmt-sa ] (config) # show ufm status
UFM mode: Management
Local - ufmapl_3467ed (172.30.30.8)
========================================
UFM Running
SM Running
IBPM Running
Health Running
MySQL Running
ufm-appliance [ mgmt-sa ] (config) #

For further information, please refer to the UFM®-SDN Appliance Command Reference Guide.