Settings and Configuration
Inside the container, the directory /config contains the configuration files for the NVIDIA® UFM® Telemetry application. The file launch_ibdiagnet_config.ini is the main configuration file.
The basic configurations of launch_ibdiagnet_config.ini are listed in the following table.
Section |
Key |
Type |
Default Value |
Description |
ibdiagnet |
ibdiagnet_enabled |
bool |
true |
Enable/disable run ibdiagnet process |
data_dir |
String |
/data |
Directory in which UFM Telemetry data is placed |
|
ibdiag_output_dir |
String |
/tmp/ibd |
Directory in which ibdiagnet places files |
|
sample_rate |
Int |
- |
Frequency of collecting ports counters data |
|
hca |
String |
mlx5_2 |
Card to use. Can provide a comma-separated list of cards for local high availability |
|
app_name |
String |
/opt/collectx/bin/ibdiagnet |
Allow user to specify full path of the ibdiagnet application if necessary |
|
topology_mode |
String |
discover |
Topology policy |
|
topology_discovery_factor |
Int |
0 |
Every "n" iterations, do discovery, otherwise, use result from last run if 0 or 1 |
|
Retention |
retention_enabled |
bool |
true |
Enable/disable retention service |
retention_interval |
time |
1d |
Interval to wait before running the retention process |
|
retention_age |
time |
100d |
Period to reserve the collected data |
|
compression |
compression_enable |
bool |
true |
Enable/disable compression service |
compression_interval |
time |
6h |
Interval to wait before running the compression service |
|
compression_age |
time |
12h |
Period to reserve the compressed data |
|
cable_info |
cable_info_schedule |
CSV |
- |
weekday/hr:min,hr:hm Time to collect cable info data |
To enable the BER collection, make sure the following lines appear and are not commented out. Specifically, the --enabled_regs dd_ppcnt_plsc needs to be added.
lookup_BER_counters=--get_phy_info --enabled_regs dd_ppcnt_plsc
param_4=BER_counters
Verify that the following flag is commented out or set to 0 (default is 1):
plugin_env_CLX_EXPORT_API_SKIP_PHY_STAT
Comment out the following line to make sure temperature sensing will not be skipped:
# arg_13=--skip temp_sensing
To enable the BER collection, make sure the following lines appear and are not commented out. Specifically, the --enabled_regs dd_ppcnt_plsc needs to be added.
lookup_Grade_counters=--get_phy_info --enabled_regs slrg
param_6=Grade_counters
Verify that the following flag is commented out or set to 0 (default is 1):
plugin_env_CLX_EXPORT_API_SKIP_SLRG
To enable PPCC, ensure that the following line is added and not commented:
arg_x=--congestion_counters # x should be replaced with the next available index!
Verify that the following flag is set to 0:
plugin_env_CLX_EXPORT_API_DISABLE_PPCCINFO
The following events are created:
ppcc_algo_config, ppcc_algo_config_params, ppcc_algo_config_support, ppcc_algo_counters
To enableXMIT_WAIT per vl, ensure that the following line is added and not commented:
arg_x=--per_slvl_cntrs # x should be replaced with the next available index!
Verify the following line does not exist / is set to 0:
plugin_env_CLX_EXPORT_API_SKIP_PORT_VL=1
The following counters are created:
PortXmitWaitVLExt[0-15]
To enable MLNX_COUNTERS (page0, 1, 255), ensure that the following line is added and not commented:
arg_x=--sc # x should be replaced with the next available index!
Verify the following line does not exist / is set to 0:
plugin_env_CLX_EXPORT_API_SKIP_MLNX_COUNTER=0
plugin_env_CLX_EXPORT_API_SKIP_MLNX_COUNTERS_PAGE1=0
plugin_env_CLX_EXPORT_API_SKIP_MLNX_COUNTERS_PAGE255=0
Prerequisite: Access to UFM that is running the sysinfo plugin. The following configs are mandatory to enable the collection.
To enables the feature, run:
plugin_env_CLX_EXPORT_API_DISABLE_MANAGED_SWITCHINFO=0
UFM endpoint:
plugin_env_MANAGED_SWITCH_DATA_EP=https://localhost/ufmRest/plugin/sysinfo/query
UFM token:
plugin_env_CLX_UFM_TOKEN=YWRtaW46MTIzNDU2
The UFM Telemetry server endpoint must be the same as the PROMETHEUS_ENDPOINT
plugin_env_CLX_EXPORT_API_MANAGED_SWITCH_CB_EP=http://localhost:1234/management/key_value
The following configs are optional:
The list of managed switches to sample, the default are all the managed switches on the fabric, defined by the sysinfo plugin:
plugin_env_CLX_EXPORT_API_MANAGED_SWITCH_LIST=
11.222
.33.44
,11.333
.444.55
sample_rate of managed_switches(seconds) should not be set faster then switch collection sample rate, default is 10 minutes.
plugin_env_CLX_EXPORT_API_MANAGED_SWITCH_INTERVAL=
600
Log File Rotation
UFM telemetry log file “ibdiagnet2_port_counters.log” size is monitored by log rotation mechanism. This is highly relevant for cases of long execution time and/or high verbosity, where the number of logs can get excessively big.
To disable log rotation, verify that the following flag is set to 0 (default is 1):
plugin_env_CLX_LOG_ROTATE_ENABLED
To change the number of rotated files, set the following flag (default is 3):
plugin_env_CLX_LOG_ROTATE_NUM_FILES
To change the rotation’s threshold, set the following flag (default is 100M), use [K|M|G] as units:
plugin_env_CLX_LOG_ROTATE_SIZE
There are three optional rotation methods, used in the following order:
rotatelogs - If this executable exists, it will be used for logs rotation, and the rotated files name will differ by index suffix.
logrotate - If this executable exists, it will be used for logs rotation, and the rotated files name will differ by timestamp suffix.
manual rotation - In case both executables are not available, UFM telemetry will manually rotate 2 log files. The older log file will have “.bck”
To skip options, the following flag set the executables to use (default is “rotatelogs,logrotate”):
plugin_env_CLX_LOG_ROTATE_APP