The table below outlines the supported configurations for enabling section collection.
To include a register for collection, certain configurations need to be added, some removed, and some may depend on other registers. Please refer to the table below for instructions:
Please note that the ‘arg’ key names may differ.
Register / Page name | Configurations to be Applied | Configurations to be Removed | Dependencies |
SLRIP | arg_slrip=--get_phy_info --enabled_regs slrip plugin_env_CLX_EXPORT_API_SKIP_SLRIP=0 | ||
SLRP | arg_slrp=--get_phy_info --enabled_regs slrp plugin_env_CLX_EXPORT_API_SKIP_SLRP=0 | ||
SLRG | arg_slrg=--get_phy_info --enabled_regs slrg plugin_env_CLX_EXPORT_API_SKIP_SLRG=0 | ||
PTYS | arg_ptys=--get_phy_info --enabled_regs ptys plugin_env_CLX_EXPORT_API_SKIP_PTYS=0 | ||
PPHCR | arg_pphcr=--get_phy_info --enabled_regs pphcr plugin_env_CLX_EXPORT_API_SKIP_PPHCR=0 | ||
SLSIR | arg_slsir=--get_phy_info --enabled_regs slsir plugin_env_CLX_EXPORT_API_SKIP_SLSIR=0 | ||
SLTP | arg_sltp=--get_phy_info --enabled_regs sltp plugin_env_CLX_EXPORT_API_SKIP_SLTP=0 | ||
PMDR | arg_pmdr=--get_phy_info --enabled_regs pmdr plugin_env_CLX_EXPORT_API_SKIP_PMDR=0 | ||
PPLL | arg_ppll=--get_phy_info --enabled_regs ppll plugin_env_CLX_EXPORT_API_SKIP_PPLL=0 | ||
SLLM | arg_sllm=--get_phy_info --enabled_regs sllm plugin_env_CLX_EXPORT_API_SKIP_SLLM=0 | ||
PHY BER Params | arg_phy_ber_params=--get_phy_info --enabled_regs ppbmp plugin_env_CLX_EXPORT_API_SKIP_PHY_BER_PARAMS=0 | ||
MRCS | arg_mrcs=--get_phy_info --enabled_regs mrcs plugin_env_CLX_EXPORT_API_SKIP_MRCS=0 | ||
PEMI Module Samples | arg_pemi_module_samples=--get_phy_info --enabled_regs pemi_module_s plugin_env_CLX_EXPORT_API_SKIP_PEMI_MODULE_SAMPLES=0 | ||
PEMI SNR Samples | arg_pemi_snr_samples=--get_phy_info --enabled_regs pemi_snr_s plugin_env_CLX_EXPORT_API_SKIP_PEMI_SNR_SAMPLES=0 | ||
PEMI Laser Samples | arg_pemi_laser_samples=--get_phy_info --enabled_regs pemi_laser_s plugin_env_CLX_EXPORT_API_SKIP_PEMI_LASER_SAMPLES=0 | ||
PEMI Pam4 Samples | arg_pemi_pam4_samples=--get_phy_info --enabled_regs pemi_pam4_s plugin_env_CLX_EXPORT_API_SKIP_PEMI_PAM4_SAMPLES=0 | ||
PEMI Pre FEC BER Samples | arg_pemi_pre_fec_ber_samples=--get_phy_info --enabled_regs pemi_ber_s plugin_env_CLX_EXPORT_API_SKIP_PEMI_PRE_FEC_BER_SAMPLES=0 | ||
PEMI Pre FEC BER Properties | arg_pemi_pre_fec_ber_properties=--get_phy_info --enabled_regs pemi_ber_p plugin_env_CLX_EXPORT_API_SKIP_PEMI_PRE_FEC_BER_PROPERTIES=0 | ||
PEMI Ferc Samples | arg_pemi_ferc_samples=--get_phy_info --enabled_regs pemi_ferc_s plugin_env_CLX_EXPORT_API_SKIP_PEMI_FERC_SAMPLES=0 | ||
PHY Counters | arg_phy_cntrs=--get_phy_info --enabled_regs dd_ppcnt_plc plugin_env_CLX_EXPORT_API_SKIP_PHY_CNTRS=0 | ||
PHY Statistics | arg_phy_stat=--get_phy_info --enabled_regs dd_ppcnt_plsc plugin_env_CLX_EXPORT_API_SKIP_PHY_STAT=0 | ||
PHY InfiniBand General Counters | arg_phy_ib_general_cntrs=--get_phy_info --enabled_regs dd_ppcnt_gen_counters plugin_env_CLX_EXPORT_API_SKIP_PHY_IB_GENERAL_CNTRS=0 | ||
Histograms | arg_hist=--get_phy_info --enabled_regs dd_ppcnt_rsfec plugin_env_CLX_EXPORT_API_SKIP_HIST=0 | ||
Troubleshoot | arg_troubleshoot=--get_phy_info --enabled_regs dd_pddr_ti plugin_env_CLX_EXPORT_API_SKIP_TROUBLESHOOT=0 | ||
Operation Info | arg_operation_info=--get_phy_info --enabled_regs dd_pddr_op plugin_env_CLX_EXPORT_API_SKIP_OPERATION_INFO=0 | ||
Link Down Info | arg_link_down_info=--get_phy_info --enabled_regs dd_pddr_ldown plugin_env_CLX_EXPORT_API_SKIP_LINK_DOWN_INFO=0 | ||
Link Up Info | arg_link_up_info=--get_phy_info --enabled_regs dd_pddr_lup plugin_env_CLX_EXPORT_API_SKIP_LINK_UP_INFO=0 | ||
PLR | arg_plr=--get_phy_info --enabled_regs dd_ppcnt_plr plugin_env_CLX_EXPORT_API_SKIP_PLR=0 | ||
Port VL | arg_port_vl=–per_slvl_cntrs plugin_env_CLX_EXPORT_API_SKIP_PORT_VL=0 | ||
MLNX Counters Page0 | arg_mlnx_counters_page0=–sc plugin_env_CLX_EXPORT_API_SKIP_MLNX_COUNTERS_PAGE0=0 | ||
MLNX Counters Page1 | arg_mlnx_counters_page1=–sc plugin_env_CLX_EXPORT_API_SKIP_MLNX_COUNTERS_PAGE1=0 | ||
MLNX Counters Page255 | arg_mlnx_counters_page255=–sc plugin_env_CLX_EXPORT_API_SKIP_MLNX_COUNTERS_PAGE255=0 | ||
Sharp PM Counters | arg_sharp_pm_counters=--sharp --sharp_opt dsc plugin_env_CLX_EXPORT_API_SKIP_SHARP_PM_COUNTERS=0 | ||
General Info | plugin_env_CLX_EXPORT_API_SKIP_GENERAL_INFO=0 | arg_general_info=--skip nodes_info | |
Device Temperature | plugin_env_CLX_EXPORT_API_SKIP_DEV_TEMP=0 | arg_dev_temp=--skip temp_sensing | |
Port Counters | plugin_env_CLX_EXPORT_API_SKIP_PORT_COUNTERS=0 | ||
Port Counters Extended | plugin_env_CLX_EXPORT_API_SKIP_PORT_COUNTERS_EXTENDED=0 | ||
Extended Speeds Counters | plugin_env_CLX_EXPORT_API_SKIP_EXTENDED_SPEEDS_COUNTERS=0 | ||
LLR Statistics | plugin_env_CLX_EXPORT_API_SKIP_LLR_STATISTICS=0 | ||
Port Rcv Error Details | plugin_env_CLX_EXPORT_API_SKIP_PORT_RCV_ERROR_DETAILS=0 | ||
Port Xmit Discard Details | plugin_env_CLX_EXPORT_API_SKIP_PORT_XMIT_DISCARD_DETAILS=0 | ||
Port RN Counters | plugin_env_CLX_EXPORT_API_SKIP_RN_COUNTERS=0 | ||
Port HBF Counters | plugin_env_CLX_EXPORT_API_SKIP_HBF_COUNTERS=0 | ||
Fast Recovery Counters | plugin_env_CLX_EXPORT_API_SKIP_PORT_FAST_RECOVERY=0 | ||
Port Hierarchy | plugin_env_CLX_EXPORT_API_SKIP_PORT_HIERARCHY=0 | ||
Link Partner | plugin_env_CLX_EXPORT_API_SKIP_LINK_PARTNER_EXT=0 | ||
Ports | plugin_env_CLX_EXPORT_API_SKIP_PORTS=0 | Operation Info | |
Calculated Info | plugin_env_CLX_EXPORT_API_SKIP_CALC_INFO=0 | Port Counters Extended, Ports, Operation Info |