Multicast Interface Definitions
All applications that receive and/or transmit multicast traffic on a multiple-interface host should define the network interfaces through which they would prefer to receive or transmit the various multicast groups.
If a networking application can use existing socket API semantics for multicast packet receive and transmit, the network interface can be defined by mapping the multicast traffic. In this case, the routing table does not have to be updated for multicast group mapping. The socket API setsockopt handles these definitions.
When the application uses setsockopt with IP_ADD_MEMBERSHIP for the receive path multicast join request, it defines the interface through which it wants the VMA to join the multicast group, and listens for incoming multicast packets for the specified multicast group on the specified socket.
IGMPv3 source specific multicast: when the application uses setsockopt with IP_ADD_SOURCE_MEMBERSHIP for the receive path multicast join request, it defines the interface through which it wants the VMA to join the multicast group, and listens for incoming multicast packets for the specified multicast group and from a specified source on the specified socket.
When the application uses setsockopt with IP_MULTICAST_IF on the transmit path, it defines the interface through which the VMA will transmit outgoing multicast packets on that specific socket.
If the user application does not use any of the above setsockopt socket lib API calls, the VMA uses the network routing table mapping to find the appropriate interface to be used for receiving or transmitting multicast packets.
Use the route command to verify that multicast addresses in the routing table are mapped to the interface you are working on. If they are not mapped, you can map them as follows:
#route add -net
It is best to perform the mapping before running the user application with VMA, so that multicast packets are routed via the 10 Gb Ethernet interface and not via the default Ethernet interface eth0.
The general rule is that the VMA routing is the same as the OS routing.