Triton Management Service Deployment Guide
Triton Management Service (TMS) is a Kubernetes microservice, and expects to be deployed into a Kubernetes managed cluster. To more easily facilitate its deployment into your Kubernetes cluster, TMS provides a Helm chart designed to simplify the deployment, or installation, process.
Preparing Your Cluster
In order to run TMS, you will need a properly-configured Kubernetes cluster. Depending on which TMS features you wish to leverage and whether you plan to run inference on GPUs, you will need to install some additional dependencies over a default installation.
As a baseline, production TMS installations are recommended to have at least two nodes – one on which to run the API server and database, and one on which to run inference. Typical deployments will have many nodes on which to run inference. One important note about the inference nodes is that they need to be able to run large container images. The default images for Triton can exceed over fourteen gigabytes, so make sure your cluster is properly configured to handle that (also, be prepared for Triton to take a bit of time the first time it starts on each node, as it can take some time for the image to transfer).
If you will be running inference on GPUs, you need to ensure that your inference nodes properly recognize the GPUs
and list them as resources. You can check whether this is the case by running
kubectl describe node $NODE_NAME
and seeing whether there is an entry with a key of
nvidia.com/gpu in the
If your cluster is not already properly configured, please see the documentation for the
GPU operator or your cloud service provider.
If your deployment requires the autoscaling feature, please see the autoscaling section below.
For the specifics about the versions of Kubernetes and other tools with which TMS was tested, please see the release notes for the version of TMS your are deploying.
Obtaining TMS Helm Chart
The TMS Helm chart can be downloaded from NVIDIA NGC. To do so, use the following command:
helm fetch https://helm.ngc.nvidia.com/nvaie/charts/triton-management-service-1.2.0.tgz --username='$oauthtoken' --password=<YOUR API KEY>
values.yaml file from the downloaded chart’s TAR file is easy. To do so, use the following command:
helm show values triton-management-service-1.2.0.tgz > values.yaml
This will create a
values.yaml file the current directory, which can modified to meet deployment needs.
See Helm Chart Values for a listing of the configurable values.
Configuring the API Server Pod
By default, TMS requests minimal CPU and memory resources from Kubernetes to run the pod containing the API server and database. While this works fine for initial testing of TMS’s features and for smaller, more stable deployments, it is likely to be insufficient if many clients are expected to be making concurrent API calls. In that situation, it is highly recommended that system administrators change the default settings.
To change the default settings, use the configuration options in
server.resources in the
The amount of CPU and memory resources is relatively low compared to that of the database. For that reason,
it is recommended that initially the database be allocated 75% of the available resources, and the API server
the other 25%. Below is a sample configuration which would do this on a node with 8 CPUs and 16Gi of memory.
Setting up secrets in Kubernetes for TMS is fairly straightforward, and we’ll cover the basics here.
Note that creation of Kubernetes secrets requires sufficient cluster privileges, and therefore might, if you lack sufficient privileges, require a cluster administrator to create them on your behalf.
Container Pull Secrets
TMS Helm chart will include any secrets listed under
values.yaml#images.secrets. The default
values.yaml file contains an example secret named “ngc-container-pull”.
To create an image-pull secret, use:
kubectl create secret docker-registry <secret-name> --docker-server=<docker-server-urn> --docker-username=<username> --docker-password=<password>
Then which ever value was chosen for
<secret-name> add to the
Configuring Model Repositories
To connect to a model repository, see the model repository page.
To enable and configure autoscaling, see the separate autoscaling configuration guide.
Configuring Triton Containers
TMS allows the TMS administrator to configure some aspect of the containers that will be created for Triton instances.
These can be configured via the top-level
triton object in
Currently, only resource constraints are specified in this section. These are all listed under
resources. TMS admins
may specify both the
default resources that Triton containers will get, as well as the
limits.maximum values that users
may request on a per-lease basis.
A sample configuration is shown below.
The fields in both
maximum sections are defined as follows.
Each value in the
maximum section must be at least as large as the
Each value in the
minimum section must be smaller than the
cpu: The number of whole or factional CPUs assigned to Triton. Can be specified either a number of cores (e.g.
4), or a number followed by
m, which represents milli-CPUs (e.g.
gpu: The number of whole GPUs assigned to Triton. Must be a whole number – GPUs cannot be fractionally assigned.
repositorySize: The amount of disk space allocated for Triton model repository, as a number plus units (e.g.
systemMemory: The amount of system memory, as a number plus units (e.g.
256Mi, and at least
sharedMemory: The amount of shared memory, as number plus units (same units as
Note: Some backends (e.g. PyTorch) allow the user to use shared memory to allocate tensors.
If you plan on using this, make sure you set a higher value.
Configuring Persisted Database
To enable and configure TMS to persist database contents, a volume claim bounded to a sizeable kuberenetes persistent volume must be provided
In the case of server failure or restart, TMS will be able to reload the contents of the database from this volume.
It should be noted that server performance can be affected by slow or unreliable storage solutions used for the persisted volume.
Assuming you’ve followed the steps above, and downloaded the TMS Helm chart, exported its
values.yaml file, and modified it as necessary, use the following command to install (aka deploy) TMS:
helm install <name-of-tms-installation> -f values.yaml triton-management-service-1.0.tgz
The Kubernetes cluster where TMS is installed should be properly secured according to best practices and the security posture of your organization.
Any additional, optional services connected to TMS such as Prometheus and Prometheus adapter should also be secured. We recommend the cluster administrator properly secure access to any S3 or other external model repositories which TMS will utilize. We reccomend leverating encryption in transit and at rest, scoping access to cluster resources following the principle of least privilege, as well as configuring audit logging for your cluster.
TMS default configuration does not allow connections from outside of the Kubernetes cluster. The user assumes responsibility for securing any external connections when changing the default configuration values.