Aerial Research Cloud Version A1.0

Part 4. Install ARC Using SDK Manager

This section can be skipped if you want to use the steps in Part 4 – Set up Aerial with OAI gNB and CN5G (Optional) instead.

In the latest version of SDKM the user can choose to install directly on the target machine or from a remote machine. SDKM uses ssh to connect to the server where it installs the gNB.

The installation guide for cuBB is located in the NVIDIA Developer Zone - Aerial SDK.

Steps to install ARC using SDK Manager can be found at https://docs.nvidia.com/sdk-manager/install-with-sdkm-aerial/index.html

You can download the installer at https://developer.download.nvidia.com/sdkmanager/redirects/sdkmanager-deb.html

You must have Aerial SDK Early Access and ARC developer program approvals. Reach out to arc@nvidia.com for ARC developer program membership.

Use the Aerial Installation Guide for the following steps:

  1. Configure BIOS Settings

  2. Install Ubuntu 22.04 Server

  3. Install the Low-Latency Kernel

  4. Configure Linux Kernel Command-line

  1. Configure OAI L2.

    IP addresses of the CN and the gNB must be configured using one of the following:

    • the gnb_cn5g_network_config.ini file and gnb_apply_network_config.sh script

    • the ARC installation guide steps to do it manually

  2. Build the OAI L2+ image.

    Follow the steps in the ARC Installation Guide.

  3. Start the Aerial container.

    See the ARC Installation Guide for recommended Docker run parameters. SDKmanager will start the Aerial container.

  4. Start the OAI L2+ container.

    See the ARC Installation Guide for recommended Docker run parameters.

  5. Build the Aerial container.

    Follow the instructions in the ARC Installation Guide.

Previous Part 3. Configure gNB Server
Next Part 5. Set up Aerial with OAI gNB and CN5G (Optional)
© Copyright 2023, NVIDIA.. Last updated on Jan 19, 2024.